https://www.quesstinternational.com, Hotels And Restaurants - QUESSTINTERNATIONAL \r\nLaboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore\r\nLab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Biosafety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore, laminar air flow manufacturers Karnataka, India \r\nWe manufacturers laboratory furniture, fume hood, biosafety cabinet, Air Shower, laminar air flow manufacturers, clean room manufacturers Bangalore Karnataka, India \r\nLab furniture manufacturers, laboratory furniture Manufacturers, BioSafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, laminar air flow manufacturers, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India\r\nLaboratory furniture Manufacturers\r\nAir Shower manufacturers\r\nClean room manufacturers\r\nBiosafety cabinet manufacturers\r\nFume hood manufacturers \r\nLab furniture Manufacturers\r\nlaminar air flow manufacturers\r\nhttps://www.quesstinternational.com/\r\nhttps://www.quesstinternational.com/index.html\r\nhttps://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html\r\nhttps://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html\r\nhttps://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html\r\nhttps://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html\r\nhttps://www.quesstinternational.com/products.html\r\nhttps://www.quesstinternational.com/pharma-industry.html\r\nhttps://www.quesstinternational.com/analytical-instruments.html#analytical\r\nhttps://www.quesstinternational.com/laboratory-furniture.html\r\nhttps://laboratory-furniture-air-shower.blogspot.com/\r\n\r\n#LaboratoryfurnitureManufacturers\r\n#AirShowermanufacturers\r\n#Cleanroommanufacturers\r\n#Biosafetycabinetmanufacturers\r\n#Fumehoodmanufacturers \r\n#LabfurnitureManufacturers\r\n#laminarairflowmanufacturers\r\n#furnitures\r\n#cabinetmanufacturers\r\n#bangalore\r\n\r\n\r\n\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nWe are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit.\r\nQuesst is a leading authorized distributor for\r\n \r\nFeatured Products\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nSEO & Designed by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nWe are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit.\r\nWe have a Wide range of Lab Chemicals and deal with all kind of Lab Instruments, Lab Furnitures etc, which are as per International standards and have been tested, approved and are in regular use in the Research Laboratories, Academic Institutes and Industries throughout the length and breadth of the country.\r\nProducts\r\nWe have wide range of Products on Laboratory Equipments & Instruments, Instruments for Pharma Industry,Friability Test Apparatus, Analytical Instruments & Consumables, Laboratory Items - General, Lab Chemicals and Laboratory Furniture.\r\n \r\n \r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nClick here for more products\r\n Laboratory Equipments & Instruments\r\n Instruments For Pharma Industry\r\n Analytical Instruments and Consumables\r\n Laboratory Items General\r\n Lab Chemicals\r\nAir Curtain\r\nWe offer Air Curtains of elegant modern design with optimum combination of low noise level, sufficient air flow and minimal turbulence. The Air Curtain is designed for use in the following industries.\r\n Pharmaceuticals & Food Industries\r\n Automotive Industries\r\n Laboratories\r\n Clean Rooms\r\n Computer Facilities\r\n Cold Storages\r\n Show Rooms & Restaurants\r\n Electrical & Electronic Industries\r\n Hospitals & Research Institutes\r\nThese Air curtain specially designed to prevent the loss of cool or conditioned air and the entry of hot contaminated air. The products can be used to meet the number of requirements:\r\n To prevent warm air infiltration in cold shops and door less reach-in refrigerated cases\r\n To keep out fumes, dust, harmful insects, maintaining a clean environment\r\n To invite customers in by allowing entry doors to stay open\r\nAir Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air.\r\nAvailable Models & Sizes:\r\nATS-AC-600\r\n600 x 225 x 225mm\r\nATS-AC-900\r\n900 x 225 x 225mm\r\nATS-AC-1200\r\n1200 x 250 x 250mm\r\npdf\r\nAutoclave\r\nAutoclave, high pressure electrically heated steam sterilizer is used for sterilization of instruments, dressing material, linen, rubber, plastic materials by mean of saturated steam under pressure of 20 psi. Autoclave is used in all scientific laboratories, educational institutions and industries. Construction: Double walled construction with boiler made of stainless steel thick sheet. Outer shell is made of mild steel finished with powder coating (or) Inner and Outer chamber is fully made of Stainless Steel Sheet also available. Lid is made of stainless steel thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested upto 40 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, spring-loaded safety valve that can set at any selected point from 15 psi to 20 psi +/- 3 psi and drain outlet. An ISI marked immersion type suitable rating heating element heats the water and steam to desired temperature and pressure. Supplied complete unit with PEDAL LIFTING DEVICE, Perforated S.S. Basket, Wing Nut opener, Cord and plug to work on 220 Volts, 50 Hz AC supply Maximum Pressure : 30 psi Regular working pressure : 15 psi.\r\nAir Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air.\r\nOptional Accessories for the above autoclaves:\r\n Water level indicator, (to indicate water position inside the boiler)\r\n Automatic low water level cut of switch\r\n Automatic pressure Control cut/off switch\r\n Automatic timer 1 Hour Electric\r\n Automatic timer 24 Hours Range (0.9999)\r\n Digital temp. Controller-cum-indicator with Sensor\r\n Radial Locking System\r\npdf\r\nAir Shower\r\nAir Showers are self contained chambers installed at entrances to clean rooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are "scrubbed" by high velocity HEPA-filtered air jets with velocities of 20-22m/s (5500-6000fpm). Contaminated air is then drawn through the base within the unit, filtered and recirculated.\r\nMaterial of Construction: All Air Showers are available in the following materials of construction depending upon customer’s choice.\r\n Wooden with laminated finish sheet\r\n G.I. with Powder Coated finish\r\n Fully Stainless Steel with satin finish (Gr-304 / Gr-316)\r\nSPECIFICATIONS – FEATURES OF AIR SHOWER:\r\n Filter- HEPA (High Efficiency Particulate Air) type, PSL challenged, zero probed. Minimum efficiency of 99.99% at 0.3 microns. HEPA filter mounted on exit side of shower in top section.\r\n Prefilter - Bonded polyfiber media minimizes surface-loading. Low wall return to HEPA filter at top unit. Quick release grille.\r\n Airflow -Air velocity at nozzle is minimum 6000FPM. 360 degree adjustable air nozzles\r\n Motor/blower compartment has hinged access panels. Return air plenums are painted.\r\n Door interlocks operate on magnetic system.\r\n Anodized aluminum doors with clear toughened glass windows. 5-30 second adjustable operation.\r\n Electrical & Power Requirements - 230V or 415V, 3 Ph. - Junction box on side & bottom for power supply.\r\n Motor/Blower Assembly - High efficiency motors to reduce electrical load. Motors thermally protected. – Motors / Blowers are selected to maintain constant required airflow rate up to twice the initial static pressure.\r\n Lighting -Recessed 2 pin fluorescent lighting. 30w.\r\n Controls - Shower operation controlled with Emergency off / button with audible alarm installed inside shower. Built-in relays from motors, locks and timers. Sequential operation\r\nModel\r\nATS-AS-900\r\nATS-AS-1200\r\nATS-AS-1500\r\nWorking Area\r\n3’ x 3’x 6.5’\r\n4’ x 3’ x 6.5’\r\n5’ x 3’ x6.5’\r\nMaterial of Construction\r\nWooden\r\nWooden\r\nWooden\r\nMaterial of Construction\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nGI with Powder Coated\r\n\r\n\r\n\r\nMaterials of Construction\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\npdf\r\nBio Safety Cabinets\r\nWe offer Bio hazard safety cabinets which are ideal for microbiological agents for biological safety level 1, 2 and 3. It offers protection to the operator and the surroundings from bio hazards. These are available in the following models:\r\n Class I Biosafety Cabinet\r\n Class II Biosafety Cabinet A1 & A2 type (70% recirculation and the 30% Exhaust)\r\n Class II Biosafety Cabinet B1 type (70% recirculation and the 30% Exhaust)\r\n Class II Biosafety Cabinet B2 type (0% recirculation and the 100% Exhaust)\r\n Class III Biosafety Cabinet\r\nThese have a gas tight chamber operated through sealed gloves that offers barricade between the worker and the hazardous material. These can be constructed in the following material:\r\n Mild Steel Powder coated finish\r\n Stainless Steel with Stain finish\r\n Wooden laminated finish\r\nTechnical Specifications:\r\n Cleanliness Level : Class 100 (ISO 5)\r\n Particle Retention : 0.3 micron & above\r\n Downflow Velocity : 90 FPM ± 20 %\r\n Standard : US Federal Standard 209E (ISO 14644-1)\r\n Noise Level : 65 dB in "A" Scale\r\n Air Balancing : Partly Re-circulated and 100% air exhausted with incineration\r\n Illumination:750 to 800 lumen\r\n Power Supply : 220V single phase 50 Hz.\r\nAPPLICATION: Most suitable for bacteriological, toxicology, where the presence of highly air borne particle, bacteria and viral need to be controlled to provide clean working conditions.\r\nAVAILABLE IN SIZES:\r\nModel\r\nATS-BS-900\r\nATS-BS-1200\r\nATS-BS-1800\r\nWorking Area\r\n3’ x 2’x 2’\r\n4’ x 2’ x 2’\r\n6’ x 2’ x2’\r\nMaterial of Construction\r\nWodden\r\nWodden\r\nWodden\r\nMaterial of Construction\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nMaterial of Construction\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\n\r\n\r\n\r\nMaterials of Construction\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nThe class I bio safety cabinets is an open-front design and works on the principle of negative pressure generations. The exhausted air is filtered through high efficiency particulate air filter (HEPA) filter. This Class I bio safety cabinet is ideal to be used where the Personnel and environmental protection is key, but not product Protection.\r\nBio safety Cabinets Class - II is classified as\r\n Bio safety Cabinets Class - ll Type A1\r\n Bio safety Cabinets Class - ll Type A2\r\n Bio safety Cabinets Class - ll Type B1\r\n Bio safety Cabinets Class - ll Type B2\r\nThis Class II vertical laminar-flow biological cabinet is an open-front, ventilated cabinet. This cabinet provides a HEPA filtered, recirculated mass airflow within the work space. The exhaust air from the cabinet is also filtered by HEPA filters. This type of bio safety cabinets provides excellent protection to users, products and the environment. While HEPA filters are effective for trapping particulates and infectious agents, these filters will not capture volatile chemicals or gases.\r\nBio safety cabinet class III is a totally closed compact and purely ventilated enclosure having an air tight construction. All the experiments/procedures are performed through rubber gloves, which are provided at the front of the unit. The primary feature of class III bio safety cabinets is that they maintain negative pressure of 0.5” or more while in operation. The supplies of fresh air are taken inside the enclosure through specially designed high efficiency perfect air filters (HEPA). The exhausted air of the unit is passed through two modules of HEPA filters, which are strategically placed in series. The air passes through the two filters before being discharged in the environment. The exhaust fan for the Class III cabinet is generally separate from the exhaust fans of the facility’s ventilation system. These types of bio safety cabinet have complete self sustained exhaust system.\r\npdf\r\nBod Incubator\r\n \r\nThe BOD incubator is most versatile and highly reliable low temperature incubator to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, level extracts, chemicals etc.\r\nCONSTRUCTION: Double walled robust cabinet, wheel mounted, Insulated with 3" mm super glass wool between the intermediate and exterior walls, which forms the main structure. Outer chamber is made of mild steel attractively finished with powder coating for durable operation. Inner Chamber made of Stainless steel interior walls has supports allowing wide range of shelf positions and spacing. Door fitted with Double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door.\r\nTEMPERATURE CONTROL: B.O.D. Incubator is the excellent and reliable Digital temp. Controller-cum- Indicator with RTD Sensor control range from 5 deg C to 60 deg C +/- 1 deg C. Hermetically sealed high performance Compressor, air cooled condenser works efficiently to lower the inside chamber temperature and accessories provided at the bottom of the chamber. Heating elements made of Nichrome wires are placed in the inner back side of the BOD Incubator. Cooling coils are distributed all round the chamber and lie in the air circulation path. Air is circulated by a fan to keep the temp uniform throughout inner chamber.\r\nCONTROL PANEL: All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting knob allows the user to select and set any desired temp.\r\nCHAMBER: OUTER M.S. WITH POWDER COATED AND INNER STAINLESS STEEL\r\nInner Chamber size W x H x D\r\nCapacity Cu. Ft.\r\nNo. of Shelves\r\nPower Rating\r\n455 x 610 x 410 mm\r\n4.0 Cu. Ft.\r\n2 Nos.\r\n1.0 KW\r\n505 x 830 x 415 mm\r\n6.0 Cu. Ft.\r\n2 Nos.\r\n1.5 KW\r\n565 x 865 x 550 mm\r\n10.0 Cu. Ft.\r\n3 Nos.\r\n1.5 KW\r\n650 x 900 x 580 mm\r\n12.0 Cu. Ft.\r\n3 Nos.\r\n2.0 KW\r\n700 x 900 x 650 mm\r\n15.0 Cu. Ft.\r\n3 Nos.\r\n2.5 KW\r\npdf\r\nColony Counter\r\nThe Digital colony counter is engineered for precision and operational efficiency suitable for research laboratories and institutions. It is designed for rapid and accurate counting of bacterial and mould colonies with 4 digits reset able counter operated by an Auto mark probe.\r\npdf\r\nDeep Freezers\r\n \r\nLow Temperature Freezer – Options 135lts to 340lts\r\nTemperature range: - 25deg C (Static)\r\n Direct Cooling\r\n 80mm Insulation for high hold overtime\r\nKey Features\r\n Fast Freeze Switch\r\n High and Low Alarm\r\n Pull out drawers\r\n Different size drawers for different applications\r\n Low Power Consumption – A+\r\n Tropicalized to perform at 43Deg C\r\npdf\r\nEnvironmental Test Chambers/Stability Chambers\r\nDOUBLE WALLED CONSTRUCTION EXTERIOR is made of sheet steel powder coated and interior is of stainless steel 316 quality. A flush fitting insulate door has leak proof gasket. The shelf position of the trays is adjustable. The rear chamber of the interior is fitted with a refrigeration evaporator, heater and air circulating fan to create a postive air flow througout the chamber. A hermetically sealed compressor below the chamber provides temperature below ambient. The same compartment houses a boiler with an immersion heater and water level controller for creating humidity. The control panel is provided at the top and comprises on off switch. Solid state digital electronic temperature controller cum indicator, humidity controller cum indicator with display of humidity in Percentage indicating lamps and protective puses.\r\n TEMPERATURE RANGE: 10 TO 60 DEG. C.\r\n ACCURACY: ± 1DEG. C.\r\n HUMIDITY RANGE: 40% TO 95%\r\n ACCURACY: ± 3%\r\n CAPACITY: 6 CU FT.\r\n SIZE: 50W X 43D X 82H\r\n CAPACITY: 10 CU. FT.\r\n CAPACITY: 10 CU. FT.\r\n CAPACITY: 12 CU FT.\r\n SIZE: 62W X 53D X 102H\r\npdf\r\nFriability Test Apparatus\r\nDigital tablet friability test apparatus (Micro Processor Based) Unit with single drum or double drum quiped with lcd display digital preset rotation counter.\r\npdf\r\nFume Cupboard\r\n \r\nWe design, manufacture and install fume cupboards, which ensure protection of personnel from hazards of over-exposure to air borne concentrations of chemical fumes, toxic gases/ vapors and industrials/ laboratory dusts above the permissible exposure limits (PEL).\r\nConstruction:\r\n Wood Melamine/M.S Powder coated/Stainless Steel\r\n Inner: FRP Coated\r\n Work Table: Granite\r\n Door: Sliding door with toughened glass\r\n S.S.Sink with inlet and outlet\r\nTechnical Specification:\r\nFume exhausts hoods manufactured by us as per customer requirements.\r\nThe inner walls of the working chamber is covered with epoxy coated asbestos or FRP or HDPE lining or as required. The working table is made of acid proof glazed tiles/18mm thick Granite and provided with gas/air Petcocks and additional power points, diffused fluorescent tubes. The front shutter is of shatter proof clear glass, framed in suitable structure with vertically sliding facility and is connected with counter weight balancing arrangement.\r\nThe exhaust system consists of a dynamically balanced centrifugal impeller, made of PVC/FRP, directly coupled with a TEFC industrial motor of 1440 RPM 1Phase or 3 phase 230/415 V and control led by a DOL starter with systems ranges from 500 CFM to 2000 CFM or above as it is proportional to the dimensions of the hood. Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter and length as per the site conditions.\r\nFume exhaust hoods are also available with full FRP construction or combination of FRP and Ply, with or without work bench. We also design and manufacture Scrubbers, Fume Extraction & Dust Collection Systems.\r\nTechnical Specification:\r\nModel Available:\r\nModel\r\nQI-FH-900\r\nFloor type\r\nQI-FH-1200\r\nFloor type\r\nQI-FH-1500\r\nFloor type\r\nQI-FH-1800\r\nFloor type\r\nModel\r\nQI-FH-900\r\nTable top type\r\nQI-FH-1200\r\nTable top type\r\nQI-FH-1500\r\nTable top type\r\nQI-FH-1800\r\nTable top type\r\nWorking Area\r\n3’ x 2’x 3’\r\n4’ x 2’ x 3’\r\n5’ x 2’ x3’\r\n6’ x 2’ x3’\r\nM O C\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nM O C\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nM O C\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\nM O C\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\npdf\r\nGarment Storage Cabinets\r\n \r\nFeatures of Garment Storage Cabinets as follows:\r\n Wooden laminated finish\r\n Electro-Galvanized iron with Powder coated finish\r\n IS 304 / 316 Grade SS with Satin Finish.\r\nTechnical Specification:\r\n\r\nProduct\r\nCleanroom Garment Storage Cabinet\r\nAir Velocity in clean filter\r\n90 FPM\r\nEquivalent Velocity pressure in mm of WG\r\n10 mm in filter plenum\r\nPressure Gauge\r\n0-25 Manometer WG\r\nHEPA filter\r\nDPH-pleat HEPA,\r\nEfficiency 99.97 at 0.3u,H13 Grade\r\nPre filter\r\nEU 3 grade, Non Oven Synthetic Media\r\nWashable pre filter\r\nNoise Level\r\nBelow 65dB on ‘A’ scale\r\nIllumination\r\nFluorescent\r\nU V Lamp\r\nUV Lamp – Make “Philips Holland”\r\nLight intensity\r\n>900 Lux at work table\r\nFront Door\r\nDoor with view panel\r\nShoe Rack\r\nBottom or Side storage to keep shoes will be provided\r\nMotor Blower (supply air)\r\n1440 RPM single phase\r\nMaintenance and access\r\nAt convenient location\r\nMovement\r\nUnit provided with 4 Nos. Castor wheels with brake\r\npdf\r\nHot Air Oven\r\n \r\nConstruction: It is triple walled construction. Inner chamber made of Stainless steel. Outer chamber is made of mild steel attractively finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of Stainless Steel\r\nInsulation: It insulated by 3" gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses.\r\nDoor: It is double walled inner Stainless Steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.\r\nHeating Elements: Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at the bottom and two vertical sides for uniform temperature all over the space.\r\nTemperature Control: The temperature is controlled by a capillary thermostat variable from 5 deg. C above ambient to 250 deg.C with a sensitivity of +/- 2 deg C.\r\nVentilation: Air ventilators are provided at top as well as at the bottom to ventilate gases and fumes if any.\r\nControl Panel: The equipment is provided with a panel which is just below the door having a Capillary type Thermostat, thermostat control known knob, On/Off switch, two pilot lamps and provision for fixing the Timer.\r\nPower Requirement: Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.\r\npdf\r\nHumidity Cabinet\r\nThis is a double walled unit with mild steel powder coat painted on out side, and the inner is made of either aluminium or stainless steel. The front door has a glass window with a wiper unit. The temperature range is ambient to 60 deg. C. Dry temperature is controlled by digital temperature controller with an accuracy of ±1 deg.c. The humidity is directly controlled by a humidity indicator cum controller and the humidity is displayed in percentage. The range is from atmospheric humidity to 95% with a sensitivity of ±3% Air circulating fan is provided to maintain both humidity and temperature. The salient feature of this unit is, the water flow is automaticaly controlled by a solenoid valve. A boiler with immersion heater is housed at the bottom of the unit for creating humidity. The unit works on 220 volts ac.(without hygrometer.)\r\nSTAINLESS STEEL INTERIOR 304 QUALITY\r\n SIZE : 455WX455DX710H MM\r\n 605WX605DX605H MM\r\n 605WX605DX910H MM\r\npdf\r\nLaminar Air Flow Horizontal\r\n \r\nLaminar air flow Workstations provide a high degree of localized control for critical processes. The Laminar air flow Workstations operate by drawing ambient air, under negative pressure, into the unit. This air first passes through a Pre-filter which traps the larger dust and dirt particles. The blower then directs this pre-filtered air, now under positive pressure, through the 99.99% efficient HEPA(High Efficiency Particular Air) having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air borne particles of size 0.3 micron and larger. Double filtered air blow in laminar flow through the work area at designed velocity of 90 ft/min +/- 20%. filter engulfing the entire work area with sterile, unidirectional ultra-clean air. It also washes away particles that may be generated by manipulations within the Flow.\r\nHEPA filters made of micro clean glass fiber paper of imported origin with fine corrugated aluminium foil separators. Pressure drop will be 18mm WG. Pre -filters are manufactured by using synthetic non woven polyester fabric material with HDPE mesh reinforcement on both sides. Both the filters are protected by suitable grill arrangement. Blower Motor Assembly: Statically and dynamically balanced single phase, double shaft motor directly coupled with a pair of centrifugal type aluminimum impeller and enclosed with a specially designed MS casing. Direct drive, size to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with 1/2 HP motor and operates with minimum noise level i.e. lower than 65 db on scale and Vibration less than 2.5 um (0.0001 deg).\r\nHorizontal Laminar Air Flow cabinet is ideal for the Application in the field of Scientific & Industrial Research, Biology, Microbiological, Biotechnology & Toxicology & Tissue Culture, Laboratories in Hospitals, Medical Services, Educational Institutions, Drugs & Pharmaceutical Industries, Automotive & Electronics, Space Applications, Sterility testing, Semiconductor manufacturers.\r\nTECHNICAL DETAILS\r\nDirection of flow\r\nHorizontal\r\nCleanliness\r\nClass 100\r\nStandard\r\nISO 14644-1\r\nIllumination\r\n>750 lux\r\nNoise Level\r\n60 – 65 decible (A)\r\nVibration Level\r\n200 micron\r\nFiltration I\r\nPre-filter 10 micron with 90% efficiency\r\nFiltration II\r\nHEPA filter 0.3 micron with 99.97% efficiency.\r\nWork table\r\nMade up of S.S. sheet\r\nFront door\r\nClear acrylic with double fold type\r\nMotor & Blower\r\n1/2hp with single shaft motor (1400 RPM) and aluminum impeller\r\nSide panel\r\n6mmthick glass.\r\nUnit supplied with standard accessories\r\nStainless Steel Table top,\r\nUV lamp: Philips Holland makes\r\nFluorescent Lamp: 2nos Philips makes\r\nGas Inlet\r\nManometer\r\nCastor wheel Roller with break\r\nPower Requirement\r\n230V, 1 Ph, 50 HZ AC supply\r\npdf\r\nLaminar Air Flow Vertical\r\n \r\nTECHNICAL DETAILS\r\nDirection of flow\r\nVertical Laminar Air Flow\r\nCleanliness\r\nClass 100\r\nStandard\r\nISO 14644-1\r\nIllumination\r\n>750 lux\r\nNoise Level\r\n60 – 65 decibel (A)\r\nVibration Level\r\n200 micron\r\nFiltration I\r\nPre-filter 10 micron with 90% efficiency\r\nFiltration II\r\nHEPA filter 0.3 micron with 99.97% efficiency.\r\nWork table\r\nMade up of S.S. sheet\r\nFront door\r\n5mm clear toughened g lass frame with vertical sliding movement\r\nMotor & Blower\r\n1/2hp with single shaft motor (1400 RPM) and aluminum impeller\r\nUnit supplied with standard accessories\r\nStainless Steel Table top,\r\nUV lamp: Philips Holland makes\r\nFluorescent Lamp: 2nos Philips makes\r\nGas Inlet\r\nManometer\r\nCastor wheel Roller with break\r\nPower Requirement\r\n230V, 1 Ph, 50 HZ AC supply\r\npdf\r\nCeiling Suspended Laminar Air Flow\r\nCeiling Suspended Laminar Air Flow (CLAF) is used for Operation Theatre applications, Pharma filling & packing line etc. CLAF provides ultra clean sterile HEPA filtered CLASS 100 air in a remote area where the exceedingly responsive progression activities are carried-out. Material of Construction: Available in Stainless Steel Construction, Or G I Construction with Powder coated finish. CLAF equipped with Minipleat HEPA with dynamically balanced ultra-low noise blowers for optimum airflow. Differential pressure monitoring carried through MAGNEHELIC Gauges. Fabricate by customized range of CLAF equipment and solution to our clients.\r\npdf\r\nLeak Test Apparatus\r\nLeak test apparatus made out off ss 304 Quality argon arc welded comprising a Cylindrical vessel and ss lid provided with Gasket and ss wing nuts for locking. A glass window provided at the top enables easy Viewing inside. A vacuum gauge with two control valves one For charging and one for releasing vacuum Vacuum pump for the above is required.\r\npdf\r\nMuffle Furnace\r\n \r\nLight weight model with ceramic insulation grooved type outer body made of thick mild steel sheet. Inside chamber is made of silluminate grooved refractory for supporting the heating elments on four sides. Heating elements are made of imported kanthal wire and easily replaceable. Two working temperature of 960 & 1000 can be provided as per requirment.complete with digital temerature controller cum indicator.indicator, thermocouple, copper thermal fuse are also provided. Works on 200/220 volts ac.\r\nTemperature Range\r\nInner Dimension in mm\r\nRating(kw)\r\n\r\nUpto 930 C\r\nUpto 1000 C\r\n\r\n100\r\n100\r\n230\r\n130\r\n130\r\n250\r\n150\r\n150\r\n300\r\n100\r\n100\r\n230\r\n130\r\n130\r\n250\r\n150\r\n150\r\n300\r\n\r\n1.75\r\n2.5\r\n3\r\n2\r\n3\r\n3.75\r\n\r\npdf\r\nMelting Point Apparatus\r\nProgrammable microprocessor based melting point cum boiling point apparatus without thermometer supplied with capilary tubes thermometer, 2nos boiling tubes silicon oil and instruction manual in this model heating rate is accurately controlled by microprocessor unit.\r\npdf\r\nOrbital Shaker\r\nShaking speed is varible from 50 to 250 rpm digital speed meter is provided in the instrument. On/off switch with pilot lamp are also provided in the control panel. Platform capacity : 16 x 500 ml conical flask additional platform for different flasks capacity within in the available space.\r\npdf\r\nOil Bath(High Temperature)\r\nDouble walled mild steel exterior powder Coat painted and ss interior. Temperature Range 50° c to 250° c. ± accuracy 1 °c. Controlled by electronic temperature Controller cum indicator. A glass window Is provided in the front for viewing. Complete With stirrer cum pumping unit with speed Regulator. Aluminum cover is also provided Works on 220 volts ac.\r\npdf\r\nPowder Dispensing(Sampling Booth)\r\n \r\nSampling Booths with its open-fronted design, this type of system provides ease of access for product, operator and environment. Reverse laminar flow powder dispensing booths (Also called powder containment booths) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. Our downflow booths are workstation are available in a variety of air-handling models. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone. Downflow Booths and Workstation provide a safe, controlled working environment and are called upon to carry out a wide range of operations.\r\n Designed in accordance with WHO-GMP\r\n Designed in accordance with WHO-GMP\r\n Designed in accordance with WHO-GMP\r\n Suitable to accommodate to floor & table top for keeping weight machine\r\nMaterial of Construction: All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice. o G.I. with Powder Coated finish o Fully Stainless Steel with satin finish (Gr-304 / Gr-316)\r\nDispensing and Sampling Booths Specifications\r\nType\r\nFront Open\r\nDirection of flow\r\nVertical\r\nMaterial of Construction\r\nSS304 / SS316 or G I Powder Coated\r\nCleanliness\r\nClass 100 as per US FED STD 209E (IS 14644-1)\r\nEquivalent Velocity pressure in mm of WG\r\n15 mm in filter plenum\r\nParticle Retention\r\n0.3 micron\r\nNoise Level\r\n65dB on Scale \'A\' ± 5\r\nVelocity\r\n120 FPM ± 20%\r\nIllumination\r\nFluorescent tubes diffusers\r\nLight intensity\r\n>900 Lux at work table\r\nPressure Differential\r\n0-25 mm Magnehelic Gauge WG\r\nPower Supply\r\n230V Single Phase, 50 Hz\r\nPre-Filters\r\nEU 3 grade, Non Oven Synthetic Media washable pre filter\r\nFront Elevation\r\nPVC Curtain (clear)\r\nIntermediate Filters\r\n3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97%\r\nHEPA Filters\r\nDPG – Pleat HEPA 99.97% efficiency @ 0.3 micron rating\r\nBlower Assembly\r\nStatically & Dynamically balanced RPM single phase blower system various depending upon size.\r\npdf\r\nUltra Cryostat(Circulator)\r\nThe inner tank shall be made out of stainless steel and is insulated with thermorix sheet. This is mounted on a sturdy iron frame. The refrigeration system is consisting of a compressor, condenser and a fan which are fixed in the bottom of the frame. The evaporator Coil is evenly placed inside the s.s.ltank. R 134 a gas is charged to the refrigeration System which brings down the temperature. A stirrer keeps the temperature uniform and accuracy is controlled by a digital Controller with 3 1\\2 digit led with resolution Of 0.5 deg.c the complete unit is covered With mild steel sheet and powder coated in a pleasing colour. Four wheels are provided for easy movement.\r\nSPECIFICATIONS:\r\n TANK CAPACITY : 15 LITRES\r\n WORKING SPACE : 200 X 200 X 250MM\r\n MAINS : 220/230 VOLTS 50HzAC\r\nTemperature range in (°C)\r\n0 TO 95\r\n-10 TO 100\r\n-20 TO 100\r\n-30 TO 100\r\n-40 TO 100\r\npdf\r\nUV Cabinet\r\n \r\nChrome view cabinet with long and short Wave and white light source and with Electronic chokes. The unit is powder Coat painted.\r\npdf\r\nVacuum Oven\r\nVacuum oven stainless steel interior and mild steel exterior. Door is casted in aluminium and provided with a glass window. Imported digital temperature controller cum indicator is provided. Vaccum control walled with an imported vaccum gauge and two stainless steel are provided. Working Chamber : 27.5 cm dia X 37.5 cm Deep.\r\nTemperature range in (°C)\r\n5 Above Ambient to 100\r\n5 Above Ambient to 150\r\n5 Above Ambient to 200\r\npdf\r\nVacuum Pump(Oil)\r\nThese mechanical pumps are oil sealed, vane type with the following features\r\n Effective vibration free performance.\r\n Simple design and construction\r\n Air ballast facility\r\n Easy oil changing\r\n Easy inspection of oil thro window\r\n Assured ultimate vacuum Easy servicing.\r\nSTAGE\r\nCapacitylit/min\r\n\r\nSingle stage\r\nDouble stage\r\n\r\n50\r\n100\r\n200\r\n50\r\n100\r\n200\r\n\r\nOptional\r\n NON RETURN VALVE\r\n MOISTURE TRAP\r\n THREEWAY CONNECTOR WITH VACUUM GAUGE\r\n EXHAUST FILTER\r\nVACUUM PUMP OIL FREE are also available.VACUUM PUMP OIL FREE are also available.\r\npdf\r\nWater Bath-Rectangular(Single Wall Elctric)\r\nComplete unit including bath and concentric rings are made of stainless steel with arrangement for 6/12 hole\r\nDescription\r\nSize in mm\r\n6Holes of 75mm dia\r\n300 x 250 x 100\r\n12Holes of 75mm dia\r\n400 x 300 x 100\r\npdf\r\nWater Bath-Thermostatic Controlled(Double Walled)\r\nTemperature range from ambient to 100 deg.c. electrically heated model thermostatic control with an accuracy of plus or minus 2 deg.c. double walled inside stainless steel and outside mild steel powder coat painted Top of the bath is provided with a cover made of aluminium powder coat painted works on 220 volts ac Inner water tank is made of 304 ss sheet and argon arc welded and hence leak proof for a minimum period of 5 years unlike other tanks which are of light gauge and lead soldered. After a few operations leak may occur spoiling glass wool and thermostat.Concentric rings are of 304 ss quality .\r\nDescription\r\nSize in mm\r\nRating (kw)\r\n6Holes of 75mm dia\r\n300 x 250 x 100\r\n1\r\n12Holes of 75mm dia\r\n355 x 355 x 405\r\n1.5\r\npdf\r\nWater Bath-Serological\r\nTemperature range from 50 °c above Ambient to 80 °c. thermostatic control With an accuracy of plus or minus 1 °C. Double walled inside stainless steel and Outside mild steel with powder coat finish, Without stirring attachment. Without thermometer and trays.\r\nSize in mm\r\n330 X 300 X 175\r\n455 X 300 X 175\r\n605 X 300 X 175\r\npdf\r\nWater Bath-Digital Temperature Controlled\r\nThis is a regular double walled water bath. The inner tank is made of ss and the outer is Made of mild steel powder coat painted. Stirrer of 1/35 hp motor keeps the temperature Uniform. The temperature is controlled By digital temperature controller cum indicator. An ss tray is provided at the bottom for holding the samples.\r\nSIZE: 400MM L X 300MM B X 100MM H\r\nTEMP.RANGE: 5DEG. C ABOVE AMBINT TO100 DEG. C\r\nACCURACY: ± 1 DEG.C\r\nACCURACY: ± 1 DEG.C\r\n(ANY OTHER SIZE CAN ALSO BE MANUFACTURED UPON REQUEST)\r\npdf\r\nWater Bath Incubator Shaker-(Metabolic Shaking Incubator)\r\nTemperature range from room temperature to 100 °c.digital temperature control with an accuracy of plus minus 0.5 °c. double walled inside made of stainless steel 304 qlty and outside mild steel sheet powder coat painted. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 r.p.m.built in water drain and digital rpm indicator to work on 220/230 volts a.c. shaking tray size : inside (stainless steel 304 qlty)\r\nSHAKING TRAY SIZE : INSIDE (STAINLESS STEEL 304 QLTY)\r\nIsb-1 275 x 275 x 75 mm\r\nIsb-2 275 x 275 x150 mm\r\nIsb-3 405 x 300 x 150 mm\r\n\r\nSHAKING RACKS MADE OF STAINLESS STEEL FOR TYPE ISB 1 & ISB 2\r\nTo hold 16 nos. 25 ml conical flask\r\nTo hold 12 nos. 50 ml conical flask\r\nTo hold 9 nos. 100 ml conical flask\r\nTo hold 5 nos. 250 ml conical flask\r\nTo hold 4 nos. 500 ml conical flask\r\nTo hold 2 nos.1000 ml conical flask\r\nTo hold 25 nos. 25 mm dia test tube\r\npdf\r\nGas Linings & Fume Hoods for AAS/ICP/MS/GC\r\n \r\nWe undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm inlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. We undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm\r\ninlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. Our Cylinder Regulator are of two types one in brass chrome plated body with SS diaphragm and other inSS body with SS diaphragm. The regulator comprises inlet pressure gauge displays the total pressure of cylinder and outlet pressure gauge shows the regulated pressure. We supply Tubing Casing, which is available in 1/2”, 1/4”, 1/8”, 1/16” sizes that comes in copper, S.S. Teflon, nylon material. The size of the tubing casing depends upon the required flow and pressure. Based on cutting edge technology, the casing capping is used to cover the tubing and to maintain the aesthetic look. We offer three different types of casing capping, which are available in M.S. powder coated, aluminum powder coated and PVC material form.\r\npdf\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nQuesst International\r\nIncubator\r\nLab Furnitures\r\nFuemhood\r\nHot Air Oven\r\nBOD Incubator\r\nClean Room\r\nLaminar Air Flow\r\nPowder Dispensing Both\r\nBio Safety Cabinet\r\nDeep Freezer\r\nMuffle Furnance\r\nGas Lining\r\nSpot Extractor\r\nGarment Storage Cabinet\r\nAnti Vibration tables\r\nAluminum Partition\r\nWater Bath\r\nPass Box\r\nVaccuum Oven\r\nHot Plate\r\nAutoclave\r\nAir Curtain\r\nChemical Storage Cabinet\r\nDrawings\r\n<\r\nStability Chamber\r\nAir Shower\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nContact Form\r\nAddress\r\nHead Office\r\nQuesst International\r\nMr. U. Sivakumar, Mr. Karteek J.N\r\n# 1205,12th CROSS,\r\nNear Essar Petrol Pump, Girinagar 2nd phase ,\r\nBangalore-560 085,\r\nCell no: +91 9980945676, 9845847070\r\nOffice:080-26721955 / +917022031133\r\nE-mail: quesst.international@yahoo.com\r\nWebsite: www.quesstinternational.com\r\nVIZAG Branch\r\nQuesst International\r\nV.Suresh\r\nD No:50/80/7, G2, Anjana Enclave,\r\nOpp: Gurudwar, Seetampet,\r\nVisakhapatnam - 530 016,\r\nMobile: +9184999 78668, 0891-2513568.\r\nE-mail: quesstinternationalvizag@gmail.com\r\nTIN No: 37588941619\r\nWebsite: www.quesstinternational.com\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\nQUESST INTERNATIONAL\r\nLaboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore\r\nLab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Bio safety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore Karnataka, India\r\n We manufacturers laboratory furniture, fume hood, bio safety cabinet, Air Shower, clean room manufacturers Bangalore Karnataka, India\r\n Lab furniture manufacturers, laboratory furniture Manufacturers, Bio Safety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore\r\n \r\nLaboratory furniture Manufacturers\r\nAir Shower manufacturers\r\nClean room manufacturers\r\nBio safety cabinet manufacturers\r\nFume hood manufacturers \r\nLab furniture Manufacturers\r\n \r\nhttps://www.quesstinternational.com/\r\nhttps://www.quesstinternational.com/index.html\r\nhttps://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html\r\nhttps://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html\r\nhttps://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html\r\nhttps://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html\r\nhttps://www.quesstinternational.com/products.html\r\nhttps://www.quesstinternational.com/pharma-industry.html\r\nhttps://www.quesstinternational.com/analytical-instruments.html#analytical\r\nhttps://www.quesstinternational.com/laboratory-furniture.html\r\nhttps://laboratory-furniture-air-shower.blogspot.com/ : Nearmyhome.in

https://www.quesstinternational.com

Domain Name:
https://www.quesstinternational.com

e-Commerce Category: Hotels and Restaurants

e-Commerce Activities:
QUESSTINTERNATIONAL Laboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore Lab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Biosafety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore, laminar air flow manufacturers Karnataka, India We manufacturers laboratory furniture, fume hood, biosafety cabinet, Air Shower, laminar air flow manufacturers, clean room manufacturers Bangalore Karnataka, India Lab furniture manufacturers, laboratory furniture Manufacturers, BioSafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, laminar air flow manufacturers, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India Laboratory furniture Manufacturers Air Shower manufacturers Clean room manufacturers Biosafety cabinet manufacturers Fume hood manufacturers Lab furniture Manufacturers laminar air flow manufacturers https://www.quesstinternational.com/ https://www.quesstinternational.com/index.html https://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html https://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html https://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html https://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html https://www.quesstinternational.com/products.html https://www.quesstinternational.com/pharma-industry.html https://www.quesstinternational.com/analytical-instruments.html#analytical https://www.quesstinternational.com/laboratory-furniture.html https://laboratory-furniture-air-shower.blogspot.com/ #LaboratoryfurnitureManufacturers #AirShowermanufacturers #Cleanroommanufacturers #Biosafetycabinetmanufacturers #Fumehoodmanufacturers #LabfurnitureManufacturers #laminarairflowmanufacturers #furnitures #cabinetmanufacturers #bangalore HOME  ABOUT US  PRODUCTS  GALLERY  CONTACT US CATEGORIES  Laboratory Equipments & Instruments  Instruments for Pharma Industry  Analytical Instruments & Consumables  Laboratory Items-General  Laboratory Chemicals  Laboratory Furnitures We are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit. Quesst is a leading authorized distributor for Featured Products We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India.... 2015-2021 © Quesst International. All Copy Rights Reserved SEO & Designed by Secure Media Technologies  HOME  ABOUT US  PRODUCTS  GALLERY  CONTACT US CATEGORIES  Laboratory Equipments & Instruments  Instruments for Pharma Industry  Analytical Instruments & Consumables  Laboratory Items-General  Laboratory Chemicals  Laboratory Furnitures We are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit. We have a Wide range of Lab Chemicals and deal with all kind of Lab Instruments, Lab Furnitures etc, which are as per International standards and have been tested, approved and are in regular use in the Research Laboratories, Academic Institutes and Industries throughout the length and breadth of the country. Products We have wide range of Products on Laboratory Equipments & Instruments, Instruments for Pharma Industry,Friability Test Apparatus, Analytical Instruments & Consumables, Laboratory Items - General, Lab Chemicals and Laboratory Furniture. We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India.... 2015-2021 © Quesst International. All Copy Rights Reserved Powered by Secure Media Technologies  HOME  ABOUT US  PRODUCTS  GALLERY  CONTACT US CATEGORIES  Laboratory Equipments & Instruments  Instruments for Pharma Industry  Analytical Instruments & Consumables  Laboratory Items-General  Laboratory Chemicals  Laboratory Furnitures Click here for more products  Laboratory Equipments & Instruments  Instruments For Pharma Industry  Analytical Instruments and Consumables  Laboratory Items General  Lab Chemicals Air Curtain We offer Air Curtains of elegant modern design with optimum combination of low noise level, sufficient air flow and minimal turbulence. The Air Curtain is designed for use in the following industries.  Pharmaceuticals & Food Industries  Automotive Industries  Laboratories  Clean Rooms  Computer Facilities  Cold Storages  Show Rooms & Restaurants  Electrical & Electronic Industries  Hospitals & Research Institutes These Air curtain specially designed to prevent the loss of cool or conditioned air and the entry of hot contaminated air. The products can be used to meet the number of requirements:  To prevent warm air infiltration in cold shops and door less reach-in refrigerated cases  To keep out fumes, dust, harmful insects, maintaining a clean environment  To invite customers in by allowing entry doors to stay open Air Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air. Available Models & Sizes: ATS-AC-600 600 x 225 x 225mm ATS-AC-900 900 x 225 x 225mm ATS-AC-1200 1200 x 250 x 250mm pdf Autoclave Autoclave, high pressure electrically heated steam sterilizer is used for sterilization of instruments, dressing material, linen, rubber, plastic materials by mean of saturated steam under pressure of 20 psi. Autoclave is used in all scientific laboratories, educational institutions and industries. Construction: Double walled construction with boiler made of stainless steel thick sheet. Outer shell is made of mild steel finished with powder coating (or) Inner and Outer chamber is fully made of Stainless Steel Sheet also available. Lid is made of stainless steel thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested upto 40 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, spring-loaded safety valve that can set at any selected point from 15 psi to 20 psi +/- 3 psi and drain outlet. An ISI marked immersion type suitable rating heating element heats the water and steam to desired temperature and pressure. Supplied complete unit with PEDAL LIFTING DEVICE, Perforated S.S. Basket, Wing Nut opener, Cord and plug to work on 220 Volts, 50 Hz AC supply Maximum Pressure : 30 psi Regular working pressure : 15 psi. Air Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air. Optional Accessories for the above autoclaves:  Water level indicator, (to indicate water position inside the boiler)  Automatic low water level cut of switch  Automatic pressure Control cut/off switch  Automatic timer 1 Hour Electric  Automatic timer 24 Hours Range (0.9999)  Digital temp. Controller-cum-indicator with Sensor  Radial Locking System pdf Air Shower Air Showers are self contained chambers installed at entrances to clean rooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are "scrubbed" by high velocity HEPA-filtered air jets with velocities of 20-22m/s (5500-6000fpm). Contaminated air is then drawn through the base within the unit, filtered and recirculated. Material of Construction: All Air Showers are available in the following materials of construction depending upon customer’s choice.  Wooden with laminated finish sheet  G.I. with Powder Coated finish  Fully Stainless Steel with satin finish (Gr-304 / Gr-316) SPECIFICATIONS – FEATURES OF AIR SHOWER:  Filter- HEPA (High Efficiency Particulate Air) type, PSL challenged, zero probed. Minimum efficiency of 99.99% at 0.3 microns. HEPA filter mounted on exit side of shower in top section.  Prefilter - Bonded polyfiber media minimizes surface-loading. Low wall return to HEPA filter at top unit. Quick release grille.  Airflow -Air velocity at nozzle is minimum 6000FPM. 360 degree adjustable air nozzles  Motor/blower compartment has hinged access panels. Return air plenums are painted.  Door interlocks operate on magnetic system.  Anodized aluminum doors with clear toughened glass windows. 5-30 second adjustable operation.  Electrical & Power Requirements - 230V or 415V, 3 Ph. - Junction box on side & bottom for power supply.  Motor/Blower Assembly - High efficiency motors to reduce electrical load. Motors thermally protected. – Motors / Blowers are selected to maintain constant required airflow rate up to twice the initial static pressure.  Lighting -Recessed 2 pin fluorescent lighting. 30w.  Controls - Shower operation controlled with Emergency off / button with audible alarm installed inside shower. Built-in relays from motors, locks and timers. Sequential operation Model ATS-AS-900 ATS-AS-1200 ATS-AS-1500 Working Area 3’ x 3’x 6.5’ 4’ x 3’ x 6.5’ 5’ x 3’ x6.5’ Material of Construction Wooden Wooden Wooden Material of Construction GI with Powder Coated GI with Powder Coated GI with Powder Coated Materials of Construction SS with satin finish GR-304/316 SS with satin finish GR-304/316 SS with satin finish GR-304/316 pdf Bio Safety Cabinets We offer Bio hazard safety cabinets which are ideal for microbiological agents for biological safety level 1, 2 and 3. It offers protection to the operator and the surroundings from bio hazards. These are available in the following models:  Class I Biosafety Cabinet  Class II Biosafety Cabinet A1 & A2 type (70% recirculation and the 30% Exhaust)  Class II Biosafety Cabinet B1 type (70% recirculation and the 30% Exhaust)  Class II Biosafety Cabinet B2 type (0% recirculation and the 100% Exhaust)  Class III Biosafety Cabinet These have a gas tight chamber operated through sealed gloves that offers barricade between the worker and the hazardous material. These can be constructed in the following material:  Mild Steel Powder coated finish  Stainless Steel with Stain finish  Wooden laminated finish Technical Specifications:  Cleanliness Level : Class 100 (ISO 5)  Particle Retention : 0.3 micron & above  Downflow Velocity : 90 FPM ± 20 %  Standard : US Federal Standard 209E (ISO 14644-1)  Noise Level : 65 dB in "A" Scale  Air Balancing : Partly Re-circulated and 100% air exhausted with incineration  Illumination:750 to 800 lumen  Power Supply : 220V single phase 50 Hz. APPLICATION: Most suitable for bacteriological, toxicology, where the presence of highly air borne particle, bacteria and viral need to be controlled to provide clean working conditions. AVAILABLE IN SIZES: Model ATS-BS-900 ATS-BS-1200 ATS-BS-1800 Working Area 3’ x 2’x 2’ 4’ x 2’ x 2’ 6’ x 2’ x2’ Material of Construction Wodden Wodden Wodden Material of Construction GI with Powder Coated GI with Powder Coated GI with Powder Coated Material of Construction SS with satin finish SS with satin finish SS with satin finish Materials of Construction SS with satin finish GR-304/316 SS with satin finish GR-304/316 SS with satin finish GR-304/316 The class I bio safety cabinets is an open-front design and works on the principle of negative pressure generations. The exhausted air is filtered through high efficiency particulate air filter (HEPA) filter. This Class I bio safety cabinet is ideal to be used where the Personnel and environmental protection is key, but not product Protection. Bio safety Cabinets Class - II is classified as  Bio safety Cabinets Class - ll Type A1  Bio safety Cabinets Class - ll Type A2  Bio safety Cabinets Class - ll Type B1  Bio safety Cabinets Class - ll Type B2 This Class II vertical laminar-flow biological cabinet is an open-front, ventilated cabinet. This cabinet provides a HEPA filtered, recirculated mass airflow within the work space. The exhaust air from the cabinet is also filtered by HEPA filters. This type of bio safety cabinets provides excellent protection to users, products and the environment. While HEPA filters are effective for trapping particulates and infectious agents, these filters will not capture volatile chemicals or gases. Bio safety cabinet class III is a totally closed compact and purely ventilated enclosure having an air tight construction. All the experiments/procedures are performed through rubber gloves, which are provided at the front of the unit. The primary feature of class III bio safety cabinets is that they maintain negative pressure of 0.5” or more while in operation. The supplies of fresh air are taken inside the enclosure through specially designed high efficiency perfect air filters (HEPA). The exhausted air of the unit is passed through two modules of HEPA filters, which are strategically placed in series. The air passes through the two filters before being discharged in the environment. The exhaust fan for the Class III cabinet is generally separate from the exhaust fans of the facility’s ventilation system. These types of bio safety cabinet have complete self sustained exhaust system. pdf Bod Incubator The BOD incubator is most versatile and highly reliable low temperature incubator to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, level extracts, chemicals etc. CONSTRUCTION: Double walled robust cabinet, wheel mounted, Insulated with 3" mm super glass wool between the intermediate and exterior walls, which forms the main structure. Outer chamber is made of mild steel attractively finished with powder coating for durable operation. Inner Chamber made of Stainless steel interior walls has supports allowing wide range of shelf positions and spacing. Door fitted with Double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door. TEMPERATURE CONTROL: B.O.D. Incubator is the excellent and reliable Digital temp. Controller-cum- Indicator with RTD Sensor control range from 5 deg C to 60 deg C +/- 1 deg C. Hermetically sealed high performance Compressor, air cooled condenser works efficiently to lower the inside chamber temperature and accessories provided at the bottom of the chamber. Heating elements made of Nichrome wires are placed in the inner back side of the BOD Incubator. Cooling coils are distributed all round the chamber and lie in the air circulation path. Air is circulated by a fan to keep the temp uniform throughout inner chamber. CONTROL PANEL: All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting knob allows the user to select and set any desired temp. CHAMBER: OUTER M.S. WITH POWDER COATED AND INNER STAINLESS STEEL Inner Chamber size W x H x D Capacity Cu. Ft. No. of Shelves Power Rating 455 x 610 x 410 mm 4.0 Cu. Ft. 2 Nos. 1.0 KW 505 x 830 x 415 mm 6.0 Cu. Ft. 2 Nos. 1.5 KW 565 x 865 x 550 mm 10.0 Cu. Ft. 3 Nos. 1.5 KW 650 x 900 x 580 mm 12.0 Cu. Ft. 3 Nos. 2.0 KW 700 x 900 x 650 mm 15.0 Cu. Ft. 3 Nos. 2.5 KW pdf Colony Counter The Digital colony counter is engineered for precision and operational efficiency suitable for research laboratories and institutions. It is designed for rapid and accurate counting of bacterial and mould colonies with 4 digits reset able counter operated by an Auto mark probe. pdf Deep Freezers Low Temperature Freezer – Options 135lts to 340lts Temperature range: - 25deg C (Static)  Direct Cooling  80mm Insulation for high hold overtime Key Features  Fast Freeze Switch  High and Low Alarm  Pull out drawers  Different size drawers for different applications  Low Power Consumption – A+  Tropicalized to perform at 43Deg C pdf Environmental Test Chambers/Stability Chambers DOUBLE WALLED CONSTRUCTION EXTERIOR is made of sheet steel powder coated and interior is of stainless steel 316 quality. A flush fitting insulate door has leak proof gasket. The shelf position of the trays is adjustable. The rear chamber of the interior is fitted with a refrigeration evaporator, heater and air circulating fan to create a postive air flow througout the chamber. A hermetically sealed compressor below the chamber provides temperature below ambient. The same compartment houses a boiler with an immersion heater and water level controller for creating humidity. The control panel is provided at the top and comprises on off switch. Solid state digital electronic temperature controller cum indicator, humidity controller cum indicator with display of humidity in Percentage indicating lamps and protective puses.  TEMPERATURE RANGE: 10 TO 60 DEG. C.  ACCURACY: ± 1DEG. C.  HUMIDITY RANGE: 40% TO 95%  ACCURACY: ± 3%  CAPACITY: 6 CU FT.  SIZE: 50W X 43D X 82H  CAPACITY: 10 CU. FT.  CAPACITY: 10 CU. FT.  CAPACITY: 12 CU FT.  SIZE: 62W X 53D X 102H pdf Friability Test Apparatus Digital tablet friability test apparatus (Micro Processor Based) Unit with single drum or double drum quiped with lcd display digital preset rotation counter. pdf Fume Cupboard We design, manufacture and install fume cupboards, which ensure protection of personnel from hazards of over-exposure to air borne concentrations of chemical fumes, toxic gases/ vapors and industrials/ laboratory dusts above the permissible exposure limits (PEL). Construction:  Wood Melamine/M.S Powder coated/Stainless Steel  Inner: FRP Coated  Work Table: Granite  Door: Sliding door with toughened glass  S.S.Sink with inlet and outlet Technical Specification: Fume exhausts hoods manufactured by us as per customer requirements. The inner walls of the working chamber is covered with epoxy coated asbestos or FRP or HDPE lining or as required. The working table is made of acid proof glazed tiles/18mm thick Granite and provided with gas/air Petcocks and additional power points, diffused fluorescent tubes. The front shutter is of shatter proof clear glass, framed in suitable structure with vertically sliding facility and is connected with counter weight balancing arrangement. The exhaust system consists of a dynamically balanced centrifugal impeller, made of PVC/FRP, directly coupled with a TEFC industrial motor of 1440 RPM 1Phase or 3 phase 230/415 V and control led by a DOL starter with systems ranges from 500 CFM to 2000 CFM or above as it is proportional to the dimensions of the hood. Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter and length as per the site conditions. Fume exhaust hoods are also available with full FRP construction or combination of FRP and Ply, with or without work bench. We also design and manufacture Scrubbers, Fume Extraction & Dust Collection Systems. Technical Specification: Model Available: Model QI-FH-900 Floor type QI-FH-1200 Floor type QI-FH-1500 Floor type QI-FH-1800 Floor type Model QI-FH-900 Table top type QI-FH-1200 Table top type QI-FH-1500 Table top type QI-FH-1800 Table top type Working Area 3’ x 2’x 3’ 4’ x 2’ x 3’ 5’ x 2’ x3’ 6’ x 2’ x3’ M O C Melamine laminated wooden Melamine laminated wooden Melamine laminated wooden Melamine laminated wooden M O C G I with Powder Coated finish G I with Powder Coated finish G I with Powder Coated finish G I with Powder Coated finish M O C SS with satin finish SS with satin finish SS with satin finish SS with satin finish M O C FRP with PU coated finish FRP with PU coated finish FRP with PU coated finish FRP with PU coated finish pdf Garment Storage Cabinets Features of Garment Storage Cabinets as follows:  Wooden laminated finish  Electro-Galvanized iron with Powder coated finish  IS 304 / 316 Grade SS with Satin Finish. Technical Specification: Product Cleanroom Garment Storage Cabinet Air Velocity in clean filter 90 FPM Equivalent Velocity pressure in mm of WG 10 mm in filter plenum Pressure Gauge 0-25 Manometer WG HEPA filter DPH-pleat HEPA, Efficiency 99.97 at 0.3u,H13 Grade Pre filter EU 3 grade, Non Oven Synthetic Media Washable pre filter Noise Level Below 65dB on ‘A’ scale Illumination Fluorescent U V Lamp UV Lamp – Make “Philips Holland” Light intensity >900 Lux at work table Front Door Door with view panel Shoe Rack Bottom or Side storage to keep shoes will be provided Motor Blower (supply air) 1440 RPM single phase Maintenance and access At convenient location Movement Unit provided with 4 Nos. Castor wheels with brake pdf Hot Air Oven Construction: It is triple walled construction. Inner chamber made of Stainless steel. Outer chamber is made of mild steel attractively finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of Stainless Steel Insulation: It insulated by 3" gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Door: It is double walled inner Stainless Steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock. Heating Elements: Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at the bottom and two vertical sides for uniform temperature all over the space. Temperature Control: The temperature is controlled by a capillary thermostat variable from 5 deg. C above ambient to 250 deg.C with a sensitivity of +/- 2 deg C. Ventilation: Air ventilators are provided at top as well as at the bottom to ventilate gases and fumes if any. Control Panel: The equipment is provided with a panel which is just below the door having a Capillary type Thermostat, thermostat control known knob, On/Off switch, two pilot lamps and provision for fixing the Timer. Power Requirement: Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply. pdf Humidity Cabinet This is a double walled unit with mild steel powder coat painted on out side, and the inner is made of either aluminium or stainless steel. The front door has a glass window with a wiper unit. The temperature range is ambient to 60 deg. C. Dry temperature is controlled by digital temperature controller with an accuracy of ±1 deg.c. The humidity is directly controlled by a humidity indicator cum controller and the humidity is displayed in percentage. The range is from atmospheric humidity to 95% with a sensitivity of ±3% Air circulating fan is provided to maintain both humidity and temperature. The salient feature of this unit is, the water flow is automaticaly controlled by a solenoid valve. A boiler with immersion heater is housed at the bottom of the unit for creating humidity. The unit works on 220 volts ac.(without hygrometer.) STAINLESS STEEL INTERIOR 304 QUALITY  SIZE : 455WX455DX710H MM  605WX605DX605H MM  605WX605DX910H MM pdf Laminar Air Flow Horizontal Laminar air flow Workstations provide a high degree of localized control for critical processes. The Laminar air flow Workstations operate by drawing ambient air, under negative pressure, into the unit. This air first passes through a Pre-filter which traps the larger dust and dirt particles. The blower then directs this pre-filtered air, now under positive pressure, through the 99.99% efficient HEPA(High Efficiency Particular Air) having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air borne particles of size 0.3 micron and larger. Double filtered air blow in laminar flow through the work area at designed velocity of 90 ft/min +/- 20%. filter engulfing the entire work area with sterile, unidirectional ultra-clean air. It also washes away particles that may be generated by manipulations within the Flow. HEPA filters made of micro clean glass fiber paper of imported origin with fine corrugated aluminium foil separators. Pressure drop will be 18mm WG. Pre -filters are manufactured by using synthetic non woven polyester fabric material with HDPE mesh reinforcement on both sides. Both the filters are protected by suitable grill arrangement. Blower Motor Assembly: Statically and dynamically balanced single phase, double shaft motor directly coupled with a pair of centrifugal type aluminimum impeller and enclosed with a specially designed MS casing. Direct drive, size to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with 1/2 HP motor and operates with minimum noise level i.e. lower than 65 db on scale and Vibration less than 2.5 um (0.0001 deg). Horizontal Laminar Air Flow cabinet is ideal for the Application in the field of Scientific & Industrial Research, Biology, Microbiological, Biotechnology & Toxicology & Tissue Culture, Laboratories in Hospitals, Medical Services, Educational Institutions, Drugs & Pharmaceutical Industries, Automotive & Electronics, Space Applications, Sterility testing, Semiconductor manufacturers. TECHNICAL DETAILS Direction of flow Horizontal Cleanliness Class 100 Standard ISO 14644-1 Illumination >750 lux Noise Level 60 – 65 decible (A) Vibration Level 200 micron Filtration I Pre-filter 10 micron with 90% efficiency Filtration II HEPA filter 0.3 micron with 99.97% efficiency. Work table Made up of S.S. sheet Front door Clear acrylic with double fold type Motor & Blower 1/2hp with single shaft motor (1400 RPM) and aluminum impeller Side panel 6mmthick glass. Unit supplied with standard accessories Stainless Steel Table top, UV lamp: Philips Holland makes Fluorescent Lamp: 2nos Philips makes Gas Inlet Manometer Castor wheel Roller with break Power Requirement 230V, 1 Ph, 50 HZ AC supply pdf Laminar Air Flow Vertical TECHNICAL DETAILS Direction of flow Vertical Laminar Air Flow Cleanliness Class 100 Standard ISO 14644-1 Illumination >750 lux Noise Level 60 – 65 decibel (A) Vibration Level 200 micron Filtration I Pre-filter 10 micron with 90% efficiency Filtration II HEPA filter 0.3 micron with 99.97% efficiency. Work table Made up of S.S. sheet Front door 5mm clear toughened g lass frame with vertical sliding movement Motor & Blower 1/2hp with single shaft motor (1400 RPM) and aluminum impeller Unit supplied with standard accessories Stainless Steel Table top, UV lamp: Philips Holland makes Fluorescent Lamp: 2nos Philips makes Gas Inlet Manometer Castor wheel Roller with break Power Requirement 230V, 1 Ph, 50 HZ AC supply pdf Ceiling Suspended Laminar Air Flow Ceiling Suspended Laminar Air Flow (CLAF) is used for Operation Theatre applications, Pharma filling & packing line etc. CLAF provides ultra clean sterile HEPA filtered CLASS 100 air in a remote area where the exceedingly responsive progression activities are carried-out. Material of Construction: Available in Stainless Steel Construction, Or G I Construction with Powder coated finish. CLAF equipped with Minipleat HEPA with dynamically balanced ultra-low noise blowers for optimum airflow. Differential pressure monitoring carried through MAGNEHELIC Gauges. Fabricate by customized range of CLAF equipment and solution to our clients. pdf Leak Test Apparatus Leak test apparatus made out off ss 304 Quality argon arc welded comprising a Cylindrical vessel and ss lid provided with Gasket and ss wing nuts for locking. A glass window provided at the top enables easy Viewing inside. A vacuum gauge with two control valves one For charging and one for releasing vacuum Vacuum pump for the above is required. pdf Muffle Furnace Light weight model with ceramic insulation grooved type outer body made of thick mild steel sheet. Inside chamber is made of silluminate grooved refractory for supporting the heating elments on four sides. Heating elements are made of imported kanthal wire and easily replaceable. Two working temperature of 960 & 1000 can be provided as per requirment.complete with digital temerature controller cum indicator.indicator, thermocouple, copper thermal fuse are also provided. Works on 200/220 volts ac. Temperature Range Inner Dimension in mm Rating(kw) Upto 930 C Upto 1000 C 100 100 230 130 130 250 150 150 300 100 100 230 130 130 250 150 150 300 1.75 2.5 3 2 3 3.75 pdf Melting Point Apparatus Programmable microprocessor based melting point cum boiling point apparatus without thermometer supplied with capilary tubes thermometer, 2nos boiling tubes silicon oil and instruction manual in this model heating rate is accurately controlled by microprocessor unit. pdf Orbital Shaker Shaking speed is varible from 50 to 250 rpm digital speed meter is provided in the instrument. On/off switch with pilot lamp are also provided in the control panel. Platform capacity : 16 x 500 ml conical flask additional platform for different flasks capacity within in the available space. pdf Oil Bath(High Temperature) Double walled mild steel exterior powder Coat painted and ss interior. Temperature Range 50° c to 250° c. ± accuracy 1 °c. Controlled by electronic temperature Controller cum indicator. A glass window Is provided in the front for viewing. Complete With stirrer cum pumping unit with speed Regulator. Aluminum cover is also provided Works on 220 volts ac. pdf Powder Dispensing(Sampling Booth) Sampling Booths with its open-fronted design, this type of system provides ease of access for product, operator and environment. Reverse laminar flow powder dispensing booths (Also called powder containment booths) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. Our downflow booths are workstation are available in a variety of air-handling models. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone. Downflow Booths and Workstation provide a safe, controlled working environment and are called upon to carry out a wide range of operations.  Designed in accordance with WHO-GMP  Designed in accordance with WHO-GMP  Designed in accordance with WHO-GMP  Suitable to accommodate to floor & table top for keeping weight machine Material of Construction: All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice. o G.I. with Powder Coated finish o Fully Stainless Steel with satin finish (Gr-304 / Gr-316) Dispensing and Sampling Booths Specifications Type Front Open Direction of flow Vertical Material of Construction SS304 / SS316 or G I Powder Coated Cleanliness Class 100 as per US FED STD 209E (IS 14644-1) Equivalent Velocity pressure in mm of WG 15 mm in filter plenum Particle Retention 0.3 micron Noise Level 65dB on Scale 'A ' ± 5 Velocity 120 FPM ± 20% Illumination Fluorescent tubes diffusers Light intensity >900 Lux at work table Pressure Differential 0-25 mm Magnehelic Gauge WG Power Supply 230V Single Phase, 50 Hz Pre-Filters EU 3 grade, Non Oven Synthetic Media washable pre filter Front Elevation PVC Curtain (clear) Intermediate Filters 3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97% HEPA Filters DPG – Pleat HEPA 99.97% efficiency @ 0.3 micron rating Blower Assembly Statically & Dynamically balanced RPM single phase blower system various depending upon size. pdf Ultra Cryostat(Circulator) The inner tank shall be made out of stainless steel and is insulated with thermorix sheet. This is mounted on a sturdy iron frame. The refrigeration system is consisting of a compressor, condenser and a fan which are fixed in the bottom of the frame. The evaporator Coil is evenly placed inside the s.s.ltank. R 134 a gas is charged to the refrigeration System which brings down the temperature. A stirrer keeps the temperature uniform and accuracy is controlled by a digital Controller with 3 1 2 digit led with resolution Of 0.5 deg.c the complete unit is covered With mild steel sheet and powder coated in a pleasing colour. Four wheels are provided for easy movement. SPECIFICATIONS:  TANK CAPACITY : 15 LITRES  WORKING SPACE : 200 X 200 X 250MM  MAINS : 220/230 VOLTS 50HzAC Temperature range in (°C) 0 TO 95 -10 TO 100 -20 TO 100 -30 TO 100 -40 TO 100 pdf UV Cabinet Chrome view cabinet with long and short Wave and white light source and with Electronic chokes. The unit is powder Coat painted. pdf Vacuum Oven Vacuum oven stainless steel interior and mild steel exterior. Door is casted in aluminium and provided with a glass window. Imported digital temperature controller cum indicator is provided. Vaccum control walled with an imported vaccum gauge and two stainless steel are provided. Working Chamber : 27.5 cm dia X 37.5 cm Deep. Temperature range in (°C) 5 Above Ambient to 100 5 Above Ambient to 150 5 Above Ambient to 200 pdf Vacuum Pump(Oil) These mechanical pumps are oil sealed, vane type with the following features  Effective vibration free performance.  Simple design and construction  Air ballast facility  Easy oil changing  Easy inspection of oil thro window  Assured ultimate vacuum Easy servicing. STAGE Capacitylit/min Single stage Double stage 50 100 200 50 100 200 Optional  NON RETURN VALVE  MOISTURE TRAP  THREEWAY CONNECTOR WITH VACUUM GAUGE  EXHAUST FILTER VACUUM PUMP OIL FREE are also available.VACUUM PUMP OIL FREE are also available. pdf Water Bath-Rectangular(Single Wall Elctric) Complete unit including bath and concentric rings are made of stainless steel with arrangement for 6/12 hole Description Size in mm 6Holes of 75mm dia 300 x 250 x 100 12Holes of 75mm dia 400 x 300 x 100 pdf Water Bath-Thermostatic Controlled(Double Walled) Temperature range from ambient to 100 deg.c. electrically heated model thermostatic control with an accuracy of plus or minus 2 deg.c. double walled inside stainless steel and outside mild steel powder coat painted Top of the bath is provided with a cover made of aluminium powder coat painted works on 220 volts ac Inner water tank is made of 304 ss sheet and argon arc welded and hence leak proof for a minimum period of 5 years unlike other tanks which are of light gauge and lead soldered. After a few operations leak may occur spoiling glass wool and thermostat.Concentric rings are of 304 ss quality . Description Size in mm Rating (kw) 6Holes of 75mm dia 300 x 250 x 100 1 12Holes of 75mm dia 355 x 355 x 405 1.5 pdf Water Bath-Serological Temperature range from 50 °c above Ambient to 80 °c. thermostatic control With an accuracy of plus or minus 1 °C. Double walled inside stainless steel and Outside mild steel with powder coat finish, Without stirring attachment. Without thermometer and trays. Size in mm 330 X 300 X 175 455 X 300 X 175 605 X 300 X 175 pdf Water Bath-Digital Temperature Controlled This is a regular double walled water bath. The inner tank is made of ss and the outer is Made of mild steel powder coat painted. Stirrer of 1/35 hp motor keeps the temperature Uniform. The temperature is controlled By digital temperature controller cum indicator. An ss tray is provided at the bottom for holding the samples. SIZE: 400MM L X 300MM B X 100MM H TEMP.RANGE: 5DEG. C ABOVE AMBINT TO100 DEG. C ACCURACY: ± 1 DEG.C ACCURACY: ± 1 DEG.C (ANY OTHER SIZE CAN ALSO BE MANUFACTURED UPON REQUEST) pdf Water Bath Incubator Shaker-(Metabolic Shaking Incubator) Temperature range from room temperature to 100 °c.digital temperature control with an accuracy of plus minus 0.5 °c. double walled inside made of stainless steel 304 qlty and outside mild steel sheet powder coat painted. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 r.p.m.built in water drain and digital rpm indicator to work on 220/230 volts a.c. shaking tray size : inside (stainless steel 304 qlty) SHAKING TRAY SIZE : INSIDE (STAINLESS STEEL 304 QLTY) Isb-1 275 x 275 x 75 mm Isb-2 275 x 275 x150 mm Isb-3 405 x 300 x 150 mm SHAKING RACKS MADE OF STAINLESS STEEL FOR TYPE ISB 1 & ISB 2 To hold 16 nos. 25 ml conical flask To hold 12 nos. 50 ml conical flask To hold 9 nos. 100 ml conical flask To hold 5 nos. 250 ml conical flask To hold 4 nos. 500 ml conical flask To hold 2 nos.1000 ml conical flask To hold 25 nos. 25 mm dia test tube pdf Gas Linings & Fume Hoods for AAS/ICP/MS/GC We undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm inlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. We undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm inlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. Our Cylinder Regulator are of two types one in brass chrome plated body with SS diaphragm and other inSS body with SS diaphragm. The regulator comprises inlet pressure gauge displays the total pressure of cylinder and outlet pressure gauge shows the regulated pressure. We supply Tubing Casing, which is available in 1/2”, 1/4”, 1/8”, 1/16” sizes that comes in copper, S.S. Teflon, nylon material. The size of the tubing casing depends upon the required flow and pressure. Based on cutting edge technology, the casing capping is used to cover the tubing and to maintain the aesthetic look. We offer three different types of casing capping, which are available in M.S. powder coated, aluminum powder coated and PVC material form. pdf We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India.... 2015-2021 © Quesst International. All Copy Rights Reserved Powered by Secure Media Technologies  HOME  ABOUT US  PRODUCTS  GALLERY  CONTACT US CATEGORIES  Laboratory Equipments & Instruments  Instruments for Pharma Industry  Analytical Instruments & Consumables  Laboratory Items-General  Laboratory Chemicals  Laboratory Furnitures Quesst International Incubator Lab Furnitures Fuemhood Hot Air Oven BOD Incubator Clean Room Laminar Air Flow Powder Dispensing Both Bio Safety Cabinet Deep Freezer Muffle Furnance Gas Lining Spot Extractor Garment Storage Cabinet Anti Vibration tables Aluminum Partition Water Bath Pass Box Vaccuum Oven Hot Plate Autoclave Air Curtain Chemical Storage Cabinet Drawings < Stability Chamber Air Shower We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India.... 2015-2021 © Quesst International. All Copy Rights Reserved Powered by Secure Media Technologies  HOME  ABOUT US  PRODUCTS  GALLERY  CONTACT US CATEGORIES  Laboratory Equipments & Instruments  Instruments for Pharma Industry  Analytical Instruments & Consumables  Laboratory Items-General  Laboratory Chemicals  Laboratory Furnitures Contact Form Address Head Office Quesst International Mr. U. Sivakumar, Mr. Karteek J.N # 1205,12th CROSS, Near Essar Petrol Pump, Girinagar 2nd phase , Bangalore-560 085, Cell no: +91 9980945676, 9845847070 Office:080-26721955 / +917022031133 E-mail: quesst.international@yahoo.com Website: www.quesstinternational.com VIZAG Branch Quesst International V.Suresh D No:50/80/7, G2, Anjana Enclave, Opp: Gurudwar, Seetampet, Visakhapatnam - 530 016, Mobile: +9184999 78668, 0891-2513568. E-mail: quesstinternationalvizag@gmail.com TIN No: 37588941619 Website: www.quesstinternational.com We are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India.... 2015-2021 © Quesst International. All Copy Rights Reserved Powered by Secure Media Technologies QUESST INTERNATIONAL Laboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore Lab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Bio safety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore Karnataka, India We manufacturers laboratory furniture, fume hood, bio safety cabinet, Air Shower, clean room manufacturers Bangalore Karnataka, India Lab furniture manufacturers, laboratory furniture Manufacturers, Bio Safety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Laboratory furniture Manufacturers Air Shower manufacturers Clean room manufacturers Bio safety cabinet manufacturers Fume hood manufacturers Lab furniture Manufacturers https://www.quesstinternational.com/ https://www.quesstinternational.com/index.html https://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html https://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html https://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html https://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html https://www.quesstinternational.com/products.html https://www.quesstinternational.com/pharma-industry.html https://www.quesstinternational.com/analytical-instruments.html#analytical https://www.quesstinternational.com/laboratory-furniture.html https://laboratory-furniture-air-shower.blogspot.com/

https://www.quesstinternational.com, Hotels and Restaurants, QUESSTINTERNATIONAL \r\nLaboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore\r\nLab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Biosafety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore, laminar air flow manufacturers Karnataka, India \r\nWe manufacturers laboratory furniture, fume hood, biosafety cabinet, Air Shower, laminar air flow manufacturers, clean room manufacturers Bangalore Karnataka, India \r\nLab furniture manufacturers, laboratory furniture Manufacturers, BioSafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, laminar air flow manufacturers, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India\r\nLaboratory furniture Manufacturers\r\nAir Shower manufacturers\r\nClean room manufacturers\r\nBiosafety cabinet manufacturers\r\nFume hood manufacturers \r\nLab furniture Manufacturers\r\nlaminar air flow manufacturers\r\nhttps://www.quesstinternational.com/\r\nhttps://www.quesstinternational.com/index.html\r\nhttps://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html\r\nhttps://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html\r\nhttps://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html\r\nhttps://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html\r\nhttps://www.quesstinternational.com/products.html\r\nhttps://www.quesstinternational.com/pharma-industry.html\r\nhttps://www.quesstinternational.com/analytical-instruments.html#analytical\r\nhttps://www.quesstinternational.com/laboratory-furniture.html\r\nhttps://laboratory-furniture-air-shower.blogspot.com/\r\n\r\n#LaboratoryfurnitureManufacturers\r\n#AirShowermanufacturers\r\n#Cleanroommanufacturers\r\n#Biosafetycabinetmanufacturers\r\n#Fumehoodmanufacturers \r\n#LabfurnitureManufacturers\r\n#laminarairflowmanufacturers\r\n#furnitures\r\n#cabinetmanufacturers\r\n#bangalore\r\n\r\n\r\n\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nWe are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit.\r\nQuesst is a leading authorized distributor for\r\n \r\nFeatured Products\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nSEO & Designed by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nWe are pleased to introduce our company "QUESST INTERERNATIONAL", Bangalore. We are young energetic, professionally qualified with post graduation in chemistry and marketing/Supply chain management respectively. The objective of our company is to create a partnership with customers by forging long-term relationship that creates synergies of knowledge, security and adaptability and with manufacturers/suppliers by leveraging their resources, capabilities, expertise for mutual benefit.\r\nWe have a Wide range of Lab Chemicals and deal with all kind of Lab Instruments, Lab Furnitures etc, which are as per International standards and have been tested, approved and are in regular use in the Research Laboratories, Academic Institutes and Industries throughout the length and breadth of the country.\r\nProducts\r\nWe have wide range of Products on Laboratory Equipments & Instruments, Instruments for Pharma Industry,Friability Test Apparatus, Analytical Instruments & Consumables, Laboratory Items - General, Lab Chemicals and Laboratory Furniture.\r\n \r\n \r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nClick here for more products\r\n Laboratory Equipments & Instruments\r\n Instruments For Pharma Industry\r\n Analytical Instruments and Consumables\r\n Laboratory Items General\r\n Lab Chemicals\r\nAir Curtain\r\nWe offer Air Curtains of elegant modern design with optimum combination of low noise level, sufficient air flow and minimal turbulence. The Air Curtain is designed for use in the following industries.\r\n Pharmaceuticals & Food Industries\r\n Automotive Industries\r\n Laboratories\r\n Clean Rooms\r\n Computer Facilities\r\n Cold Storages\r\n Show Rooms & Restaurants\r\n Electrical & Electronic Industries\r\n Hospitals & Research Institutes\r\nThese Air curtain specially designed to prevent the loss of cool or conditioned air and the entry of hot contaminated air. The products can be used to meet the number of requirements:\r\n To prevent warm air infiltration in cold shops and door less reach-in refrigerated cases\r\n To keep out fumes, dust, harmful insects, maintaining a clean environment\r\n To invite customers in by allowing entry doors to stay open\r\nAir Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air.\r\nAvailable Models & Sizes:\r\nATS-AC-600\r\n600 x 225 x 225mm\r\nATS-AC-900\r\n900 x 225 x 225mm\r\nATS-AC-1200\r\n1200 x 250 x 250mm\r\npdf\r\nAutoclave\r\nAutoclave, high pressure electrically heated steam sterilizer is used for sterilization of instruments, dressing material, linen, rubber, plastic materials by mean of saturated steam under pressure of 20 psi. Autoclave is used in all scientific laboratories, educational institutions and industries. Construction: Double walled construction with boiler made of stainless steel thick sheet. Outer shell is made of mild steel finished with powder coating (or) Inner and Outer chamber is fully made of Stainless Steel Sheet also available. Lid is made of stainless steel thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested upto 40 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, spring-loaded safety valve that can set at any selected point from 15 psi to 20 psi +/- 3 psi and drain outlet. An ISI marked immersion type suitable rating heating element heats the water and steam to desired temperature and pressure. Supplied complete unit with PEDAL LIFTING DEVICE, Perforated S.S. Basket, Wing Nut opener, Cord and plug to work on 220 Volts, 50 Hz AC supply Maximum Pressure : 30 psi Regular working pressure : 15 psi.\r\nAir Curtains significantly reduce energy consumption – especially when there is a substantial temperature difference between inside and outside air.\r\nOptional Accessories for the above autoclaves:\r\n Water level indicator, (to indicate water position inside the boiler)\r\n Automatic low water level cut of switch\r\n Automatic pressure Control cut/off switch\r\n Automatic timer 1 Hour Electric\r\n Automatic timer 24 Hours Range (0.9999)\r\n Digital temp. Controller-cum-indicator with Sensor\r\n Radial Locking System\r\npdf\r\nAir Shower\r\nAir Showers are self contained chambers installed at entrances to clean rooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are "scrubbed" by high velocity HEPA-filtered air jets with velocities of 20-22m/s (5500-6000fpm). Contaminated air is then drawn through the base within the unit, filtered and recirculated.\r\nMaterial of Construction: All Air Showers are available in the following materials of construction depending upon customer’s choice.\r\n Wooden with laminated finish sheet\r\n G.I. with Powder Coated finish\r\n Fully Stainless Steel with satin finish (Gr-304 / Gr-316)\r\nSPECIFICATIONS – FEATURES OF AIR SHOWER:\r\n Filter- HEPA (High Efficiency Particulate Air) type, PSL challenged, zero probed. Minimum efficiency of 99.99% at 0.3 microns. HEPA filter mounted on exit side of shower in top section.\r\n Prefilter - Bonded polyfiber media minimizes surface-loading. Low wall return to HEPA filter at top unit. Quick release grille.\r\n Airflow -Air velocity at nozzle is minimum 6000FPM. 360 degree adjustable air nozzles\r\n Motor/blower compartment has hinged access panels. Return air plenums are painted.\r\n Door interlocks operate on magnetic system.\r\n Anodized aluminum doors with clear toughened glass windows. 5-30 second adjustable operation.\r\n Electrical & Power Requirements - 230V or 415V, 3 Ph. - Junction box on side & bottom for power supply.\r\n Motor/Blower Assembly - High efficiency motors to reduce electrical load. Motors thermally protected. – Motors / Blowers are selected to maintain constant required airflow rate up to twice the initial static pressure.\r\n Lighting -Recessed 2 pin fluorescent lighting. 30w.\r\n Controls - Shower operation controlled with Emergency off / button with audible alarm installed inside shower. Built-in relays from motors, locks and timers. Sequential operation\r\nModel\r\nATS-AS-900\r\nATS-AS-1200\r\nATS-AS-1500\r\nWorking Area\r\n3’ x 3’x 6.5’\r\n4’ x 3’ x 6.5’\r\n5’ x 3’ x6.5’\r\nMaterial of Construction\r\nWooden\r\nWooden\r\nWooden\r\nMaterial of Construction\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nGI with Powder Coated\r\n\r\n\r\n\r\nMaterials of Construction\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\npdf\r\nBio Safety Cabinets\r\nWe offer Bio hazard safety cabinets which are ideal for microbiological agents for biological safety level 1, 2 and 3. It offers protection to the operator and the surroundings from bio hazards. These are available in the following models:\r\n Class I Biosafety Cabinet\r\n Class II Biosafety Cabinet A1 & A2 type (70% recirculation and the 30% Exhaust)\r\n Class II Biosafety Cabinet B1 type (70% recirculation and the 30% Exhaust)\r\n Class II Biosafety Cabinet B2 type (0% recirculation and the 100% Exhaust)\r\n Class III Biosafety Cabinet\r\nThese have a gas tight chamber operated through sealed gloves that offers barricade between the worker and the hazardous material. These can be constructed in the following material:\r\n Mild Steel Powder coated finish\r\n Stainless Steel with Stain finish\r\n Wooden laminated finish\r\nTechnical Specifications:\r\n Cleanliness Level : Class 100 (ISO 5)\r\n Particle Retention : 0.3 micron & above\r\n Downflow Velocity : 90 FPM ± 20 %\r\n Standard : US Federal Standard 209E (ISO 14644-1)\r\n Noise Level : 65 dB in "A" Scale\r\n Air Balancing : Partly Re-circulated and 100% air exhausted with incineration\r\n Illumination:750 to 800 lumen\r\n Power Supply : 220V single phase 50 Hz.\r\nAPPLICATION: Most suitable for bacteriological, toxicology, where the presence of highly air borne particle, bacteria and viral need to be controlled to provide clean working conditions.\r\nAVAILABLE IN SIZES:\r\nModel\r\nATS-BS-900\r\nATS-BS-1200\r\nATS-BS-1800\r\nWorking Area\r\n3’ x 2’x 2’\r\n4’ x 2’ x 2’\r\n6’ x 2’ x2’\r\nMaterial of Construction\r\nWodden\r\nWodden\r\nWodden\r\nMaterial of Construction\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nGI with Powder Coated\r\nMaterial of Construction\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\n\r\n\r\n\r\nMaterials of Construction\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nSS with satin finish GR-304/316\r\nThe class I bio safety cabinets is an open-front design and works on the principle of negative pressure generations. The exhausted air is filtered through high efficiency particulate air filter (HEPA) filter. This Class I bio safety cabinet is ideal to be used where the Personnel and environmental protection is key, but not product Protection.\r\nBio safety Cabinets Class - II is classified as\r\n Bio safety Cabinets Class - ll Type A1\r\n Bio safety Cabinets Class - ll Type A2\r\n Bio safety Cabinets Class - ll Type B1\r\n Bio safety Cabinets Class - ll Type B2\r\nThis Class II vertical laminar-flow biological cabinet is an open-front, ventilated cabinet. This cabinet provides a HEPA filtered, recirculated mass airflow within the work space. The exhaust air from the cabinet is also filtered by HEPA filters. This type of bio safety cabinets provides excellent protection to users, products and the environment. While HEPA filters are effective for trapping particulates and infectious agents, these filters will not capture volatile chemicals or gases.\r\nBio safety cabinet class III is a totally closed compact and purely ventilated enclosure having an air tight construction. All the experiments/procedures are performed through rubber gloves, which are provided at the front of the unit. The primary feature of class III bio safety cabinets is that they maintain negative pressure of 0.5” or more while in operation. The supplies of fresh air are taken inside the enclosure through specially designed high efficiency perfect air filters (HEPA). The exhausted air of the unit is passed through two modules of HEPA filters, which are strategically placed in series. The air passes through the two filters before being discharged in the environment. The exhaust fan for the Class III cabinet is generally separate from the exhaust fans of the facility’s ventilation system. These types of bio safety cabinet have complete self sustained exhaust system.\r\npdf\r\nBod Incubator\r\n \r\nThe BOD incubator is most versatile and highly reliable low temperature incubator to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, level extracts, chemicals etc.\r\nCONSTRUCTION: Double walled robust cabinet, wheel mounted, Insulated with 3" mm super glass wool between the intermediate and exterior walls, which forms the main structure. Outer chamber is made of mild steel attractively finished with powder coating for durable operation. Inner Chamber made of Stainless steel interior walls has supports allowing wide range of shelf positions and spacing. Door fitted with Double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door.\r\nTEMPERATURE CONTROL: B.O.D. Incubator is the excellent and reliable Digital temp. Controller-cum- Indicator with RTD Sensor control range from 5 deg C to 60 deg C +/- 1 deg C. Hermetically sealed high performance Compressor, air cooled condenser works efficiently to lower the inside chamber temperature and accessories provided at the bottom of the chamber. Heating elements made of Nichrome wires are placed in the inner back side of the BOD Incubator. Cooling coils are distributed all round the chamber and lie in the air circulation path. Air is circulated by a fan to keep the temp uniform throughout inner chamber.\r\nCONTROL PANEL: All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting knob allows the user to select and set any desired temp.\r\nCHAMBER: OUTER M.S. WITH POWDER COATED AND INNER STAINLESS STEEL\r\nInner Chamber size W x H x D\r\nCapacity Cu. Ft.\r\nNo. of Shelves\r\nPower Rating\r\n455 x 610 x 410 mm\r\n4.0 Cu. Ft.\r\n2 Nos.\r\n1.0 KW\r\n505 x 830 x 415 mm\r\n6.0 Cu. Ft.\r\n2 Nos.\r\n1.5 KW\r\n565 x 865 x 550 mm\r\n10.0 Cu. Ft.\r\n3 Nos.\r\n1.5 KW\r\n650 x 900 x 580 mm\r\n12.0 Cu. Ft.\r\n3 Nos.\r\n2.0 KW\r\n700 x 900 x 650 mm\r\n15.0 Cu. Ft.\r\n3 Nos.\r\n2.5 KW\r\npdf\r\nColony Counter\r\nThe Digital colony counter is engineered for precision and operational efficiency suitable for research laboratories and institutions. It is designed for rapid and accurate counting of bacterial and mould colonies with 4 digits reset able counter operated by an Auto mark probe.\r\npdf\r\nDeep Freezers\r\n \r\nLow Temperature Freezer – Options 135lts to 340lts\r\nTemperature range: - 25deg C (Static)\r\n Direct Cooling\r\n 80mm Insulation for high hold overtime\r\nKey Features\r\n Fast Freeze Switch\r\n High and Low Alarm\r\n Pull out drawers\r\n Different size drawers for different applications\r\n Low Power Consumption – A+\r\n Tropicalized to perform at 43Deg C\r\npdf\r\nEnvironmental Test Chambers/Stability Chambers\r\nDOUBLE WALLED CONSTRUCTION EXTERIOR is made of sheet steel powder coated and interior is of stainless steel 316 quality. A flush fitting insulate door has leak proof gasket. The shelf position of the trays is adjustable. The rear chamber of the interior is fitted with a refrigeration evaporator, heater and air circulating fan to create a postive air flow througout the chamber. A hermetically sealed compressor below the chamber provides temperature below ambient. The same compartment houses a boiler with an immersion heater and water level controller for creating humidity. The control panel is provided at the top and comprises on off switch. Solid state digital electronic temperature controller cum indicator, humidity controller cum indicator with display of humidity in Percentage indicating lamps and protective puses.\r\n TEMPERATURE RANGE: 10 TO 60 DEG. C.\r\n ACCURACY: ± 1DEG. C.\r\n HUMIDITY RANGE: 40% TO 95%\r\n ACCURACY: ± 3%\r\n CAPACITY: 6 CU FT.\r\n SIZE: 50W X 43D X 82H\r\n CAPACITY: 10 CU. FT.\r\n CAPACITY: 10 CU. FT.\r\n CAPACITY: 12 CU FT.\r\n SIZE: 62W X 53D X 102H\r\npdf\r\nFriability Test Apparatus\r\nDigital tablet friability test apparatus (Micro Processor Based) Unit with single drum or double drum quiped with lcd display digital preset rotation counter.\r\npdf\r\nFume Cupboard\r\n \r\nWe design, manufacture and install fume cupboards, which ensure protection of personnel from hazards of over-exposure to air borne concentrations of chemical fumes, toxic gases/ vapors and industrials/ laboratory dusts above the permissible exposure limits (PEL).\r\nConstruction:\r\n Wood Melamine/M.S Powder coated/Stainless Steel\r\n Inner: FRP Coated\r\n Work Table: Granite\r\n Door: Sliding door with toughened glass\r\n S.S.Sink with inlet and outlet\r\nTechnical Specification:\r\nFume exhausts hoods manufactured by us as per customer requirements.\r\nThe inner walls of the working chamber is covered with epoxy coated asbestos or FRP or HDPE lining or as required. The working table is made of acid proof glazed tiles/18mm thick Granite and provided with gas/air Petcocks and additional power points, diffused fluorescent tubes. The front shutter is of shatter proof clear glass, framed in suitable structure with vertically sliding facility and is connected with counter weight balancing arrangement.\r\nThe exhaust system consists of a dynamically balanced centrifugal impeller, made of PVC/FRP, directly coupled with a TEFC industrial motor of 1440 RPM 1Phase or 3 phase 230/415 V and control led by a DOL starter with systems ranges from 500 CFM to 2000 CFM or above as it is proportional to the dimensions of the hood. Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter and length as per the site conditions.\r\nFume exhaust hoods are also available with full FRP construction or combination of FRP and Ply, with or without work bench. We also design and manufacture Scrubbers, Fume Extraction & Dust Collection Systems.\r\nTechnical Specification:\r\nModel Available:\r\nModel\r\nQI-FH-900\r\nFloor type\r\nQI-FH-1200\r\nFloor type\r\nQI-FH-1500\r\nFloor type\r\nQI-FH-1800\r\nFloor type\r\nModel\r\nQI-FH-900\r\nTable top type\r\nQI-FH-1200\r\nTable top type\r\nQI-FH-1500\r\nTable top type\r\nQI-FH-1800\r\nTable top type\r\nWorking Area\r\n3’ x 2’x 3’\r\n4’ x 2’ x 3’\r\n5’ x 2’ x3’\r\n6’ x 2’ x3’\r\nM O C\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nMelamine laminated wooden\r\nM O C\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nG I with Powder Coated finish\r\nM O C\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\nSS with satin finish\r\nM O C\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\nFRP with PU coated finish\r\npdf\r\nGarment Storage Cabinets\r\n \r\nFeatures of Garment Storage Cabinets as follows:\r\n Wooden laminated finish\r\n Electro-Galvanized iron with Powder coated finish\r\n IS 304 / 316 Grade SS with Satin Finish.\r\nTechnical Specification:\r\n\r\nProduct\r\nCleanroom Garment Storage Cabinet\r\nAir Velocity in clean filter\r\n90 FPM\r\nEquivalent Velocity pressure in mm of WG\r\n10 mm in filter plenum\r\nPressure Gauge\r\n0-25 Manometer WG\r\nHEPA filter\r\nDPH-pleat HEPA,\r\nEfficiency 99.97 at 0.3u,H13 Grade\r\nPre filter\r\nEU 3 grade, Non Oven Synthetic Media\r\nWashable pre filter\r\nNoise Level\r\nBelow 65dB on ‘A’ scale\r\nIllumination\r\nFluorescent\r\nU V Lamp\r\nUV Lamp – Make “Philips Holland”\r\nLight intensity\r\n>900 Lux at work table\r\nFront Door\r\nDoor with view panel\r\nShoe Rack\r\nBottom or Side storage to keep shoes will be provided\r\nMotor Blower (supply air)\r\n1440 RPM single phase\r\nMaintenance and access\r\nAt convenient location\r\nMovement\r\nUnit provided with 4 Nos. Castor wheels with brake\r\npdf\r\nHot Air Oven\r\n \r\nConstruction: It is triple walled construction. Inner chamber made of Stainless steel. Outer chamber is made of mild steel attractively finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of Stainless Steel\r\nInsulation: It insulated by 3" gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses.\r\nDoor: It is double walled inner Stainless Steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.\r\nHeating Elements: Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at the bottom and two vertical sides for uniform temperature all over the space.\r\nTemperature Control: The temperature is controlled by a capillary thermostat variable from 5 deg. C above ambient to 250 deg.C with a sensitivity of +/- 2 deg C.\r\nVentilation: Air ventilators are provided at top as well as at the bottom to ventilate gases and fumes if any.\r\nControl Panel: The equipment is provided with a panel which is just below the door having a Capillary type Thermostat, thermostat control known knob, On/Off switch, two pilot lamps and provision for fixing the Timer.\r\nPower Requirement: Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.\r\npdf\r\nHumidity Cabinet\r\nThis is a double walled unit with mild steel powder coat painted on out side, and the inner is made of either aluminium or stainless steel. The front door has a glass window with a wiper unit. The temperature range is ambient to 60 deg. C. Dry temperature is controlled by digital temperature controller with an accuracy of ±1 deg.c. The humidity is directly controlled by a humidity indicator cum controller and the humidity is displayed in percentage. The range is from atmospheric humidity to 95% with a sensitivity of ±3% Air circulating fan is provided to maintain both humidity and temperature. The salient feature of this unit is, the water flow is automaticaly controlled by a solenoid valve. A boiler with immersion heater is housed at the bottom of the unit for creating humidity. The unit works on 220 volts ac.(without hygrometer.)\r\nSTAINLESS STEEL INTERIOR 304 QUALITY\r\n SIZE : 455WX455DX710H MM\r\n 605WX605DX605H MM\r\n 605WX605DX910H MM\r\npdf\r\nLaminar Air Flow Horizontal\r\n \r\nLaminar air flow Workstations provide a high degree of localized control for critical processes. The Laminar air flow Workstations operate by drawing ambient air, under negative pressure, into the unit. This air first passes through a Pre-filter which traps the larger dust and dirt particles. The blower then directs this pre-filtered air, now under positive pressure, through the 99.99% efficient HEPA(High Efficiency Particular Air) having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air borne particles of size 0.3 micron and larger. Double filtered air blow in laminar flow through the work area at designed velocity of 90 ft/min +/- 20%. filter engulfing the entire work area with sterile, unidirectional ultra-clean air. It also washes away particles that may be generated by manipulations within the Flow.\r\nHEPA filters made of micro clean glass fiber paper of imported origin with fine corrugated aluminium foil separators. Pressure drop will be 18mm WG. Pre -filters are manufactured by using synthetic non woven polyester fabric material with HDPE mesh reinforcement on both sides. Both the filters are protected by suitable grill arrangement. Blower Motor Assembly: Statically and dynamically balanced single phase, double shaft motor directly coupled with a pair of centrifugal type aluminimum impeller and enclosed with a specially designed MS casing. Direct drive, size to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with 1/2 HP motor and operates with minimum noise level i.e. lower than 65 db on scale and Vibration less than 2.5 um (0.0001 deg).\r\nHorizontal Laminar Air Flow cabinet is ideal for the Application in the field of Scientific & Industrial Research, Biology, Microbiological, Biotechnology & Toxicology & Tissue Culture, Laboratories in Hospitals, Medical Services, Educational Institutions, Drugs & Pharmaceutical Industries, Automotive & Electronics, Space Applications, Sterility testing, Semiconductor manufacturers.\r\nTECHNICAL DETAILS\r\nDirection of flow\r\nHorizontal\r\nCleanliness\r\nClass 100\r\nStandard\r\nISO 14644-1\r\nIllumination\r\n>750 lux\r\nNoise Level\r\n60 – 65 decible (A)\r\nVibration Level\r\n200 micron\r\nFiltration I\r\nPre-filter 10 micron with 90% efficiency\r\nFiltration II\r\nHEPA filter 0.3 micron with 99.97% efficiency.\r\nWork table\r\nMade up of S.S. sheet\r\nFront door\r\nClear acrylic with double fold type\r\nMotor & Blower\r\n1/2hp with single shaft motor (1400 RPM) and aluminum impeller\r\nSide panel\r\n6mmthick glass.\r\nUnit supplied with standard accessories\r\nStainless Steel Table top,\r\nUV lamp: Philips Holland makes\r\nFluorescent Lamp: 2nos Philips makes\r\nGas Inlet\r\nManometer\r\nCastor wheel Roller with break\r\nPower Requirement\r\n230V, 1 Ph, 50 HZ AC supply\r\npdf\r\nLaminar Air Flow Vertical\r\n \r\nTECHNICAL DETAILS\r\nDirection of flow\r\nVertical Laminar Air Flow\r\nCleanliness\r\nClass 100\r\nStandard\r\nISO 14644-1\r\nIllumination\r\n>750 lux\r\nNoise Level\r\n60 – 65 decibel (A)\r\nVibration Level\r\n200 micron\r\nFiltration I\r\nPre-filter 10 micron with 90% efficiency\r\nFiltration II\r\nHEPA filter 0.3 micron with 99.97% efficiency.\r\nWork table\r\nMade up of S.S. sheet\r\nFront door\r\n5mm clear toughened g lass frame with vertical sliding movement\r\nMotor & Blower\r\n1/2hp with single shaft motor (1400 RPM) and aluminum impeller\r\nUnit supplied with standard accessories\r\nStainless Steel Table top,\r\nUV lamp: Philips Holland makes\r\nFluorescent Lamp: 2nos Philips makes\r\nGas Inlet\r\nManometer\r\nCastor wheel Roller with break\r\nPower Requirement\r\n230V, 1 Ph, 50 HZ AC supply\r\npdf\r\nCeiling Suspended Laminar Air Flow\r\nCeiling Suspended Laminar Air Flow (CLAF) is used for Operation Theatre applications, Pharma filling & packing line etc. CLAF provides ultra clean sterile HEPA filtered CLASS 100 air in a remote area where the exceedingly responsive progression activities are carried-out. Material of Construction: Available in Stainless Steel Construction, Or G I Construction with Powder coated finish. CLAF equipped with Minipleat HEPA with dynamically balanced ultra-low noise blowers for optimum airflow. Differential pressure monitoring carried through MAGNEHELIC Gauges. Fabricate by customized range of CLAF equipment and solution to our clients.\r\npdf\r\nLeak Test Apparatus\r\nLeak test apparatus made out off ss 304 Quality argon arc welded comprising a Cylindrical vessel and ss lid provided with Gasket and ss wing nuts for locking. A glass window provided at the top enables easy Viewing inside. A vacuum gauge with two control valves one For charging and one for releasing vacuum Vacuum pump for the above is required.\r\npdf\r\nMuffle Furnace\r\n \r\nLight weight model with ceramic insulation grooved type outer body made of thick mild steel sheet. Inside chamber is made of silluminate grooved refractory for supporting the heating elments on four sides. Heating elements are made of imported kanthal wire and easily replaceable. Two working temperature of 960 & 1000 can be provided as per requirment.complete with digital temerature controller cum indicator.indicator, thermocouple, copper thermal fuse are also provided. Works on 200/220 volts ac.\r\nTemperature Range\r\nInner Dimension in mm\r\nRating(kw)\r\n\r\nUpto 930 C\r\nUpto 1000 C\r\n\r\n100\r\n100\r\n230\r\n130\r\n130\r\n250\r\n150\r\n150\r\n300\r\n100\r\n100\r\n230\r\n130\r\n130\r\n250\r\n150\r\n150\r\n300\r\n\r\n1.75\r\n2.5\r\n3\r\n2\r\n3\r\n3.75\r\n\r\npdf\r\nMelting Point Apparatus\r\nProgrammable microprocessor based melting point cum boiling point apparatus without thermometer supplied with capilary tubes thermometer, 2nos boiling tubes silicon oil and instruction manual in this model heating rate is accurately controlled by microprocessor unit.\r\npdf\r\nOrbital Shaker\r\nShaking speed is varible from 50 to 250 rpm digital speed meter is provided in the instrument. On/off switch with pilot lamp are also provided in the control panel. Platform capacity : 16 x 500 ml conical flask additional platform for different flasks capacity within in the available space.\r\npdf\r\nOil Bath(High Temperature)\r\nDouble walled mild steel exterior powder Coat painted and ss interior. Temperature Range 50° c to 250° c. ± accuracy 1 °c. Controlled by electronic temperature Controller cum indicator. A glass window Is provided in the front for viewing. Complete With stirrer cum pumping unit with speed Regulator. Aluminum cover is also provided Works on 220 volts ac.\r\npdf\r\nPowder Dispensing(Sampling Booth)\r\n \r\nSampling Booths with its open-fronted design, this type of system provides ease of access for product, operator and environment. Reverse laminar flow powder dispensing booths (Also called powder containment booths) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. Our downflow booths are workstation are available in a variety of air-handling models. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone. Downflow Booths and Workstation provide a safe, controlled working environment and are called upon to carry out a wide range of operations.\r\n Designed in accordance with WHO-GMP\r\n Designed in accordance with WHO-GMP\r\n Designed in accordance with WHO-GMP\r\n Suitable to accommodate to floor & table top for keeping weight machine\r\nMaterial of Construction: All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice. o G.I. with Powder Coated finish o Fully Stainless Steel with satin finish (Gr-304 / Gr-316)\r\nDispensing and Sampling Booths Specifications\r\nType\r\nFront Open\r\nDirection of flow\r\nVertical\r\nMaterial of Construction\r\nSS304 / SS316 or G I Powder Coated\r\nCleanliness\r\nClass 100 as per US FED STD 209E (IS 14644-1)\r\nEquivalent Velocity pressure in mm of WG\r\n15 mm in filter plenum\r\nParticle Retention\r\n0.3 micron\r\nNoise Level\r\n65dB on Scale \'A\' ± 5\r\nVelocity\r\n120 FPM ± 20%\r\nIllumination\r\nFluorescent tubes diffusers\r\nLight intensity\r\n>900 Lux at work table\r\nPressure Differential\r\n0-25 mm Magnehelic Gauge WG\r\nPower Supply\r\n230V Single Phase, 50 Hz\r\nPre-Filters\r\nEU 3 grade, Non Oven Synthetic Media washable pre filter\r\nFront Elevation\r\nPVC Curtain (clear)\r\nIntermediate Filters\r\n3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97%\r\nHEPA Filters\r\nDPG – Pleat HEPA 99.97% efficiency @ 0.3 micron rating\r\nBlower Assembly\r\nStatically & Dynamically balanced RPM single phase blower system various depending upon size.\r\npdf\r\nUltra Cryostat(Circulator)\r\nThe inner tank shall be made out of stainless steel and is insulated with thermorix sheet. This is mounted on a sturdy iron frame. The refrigeration system is consisting of a compressor, condenser and a fan which are fixed in the bottom of the frame. The evaporator Coil is evenly placed inside the s.s.ltank. R 134 a gas is charged to the refrigeration System which brings down the temperature. A stirrer keeps the temperature uniform and accuracy is controlled by a digital Controller with 3 1\\2 digit led with resolution Of 0.5 deg.c the complete unit is covered With mild steel sheet and powder coated in a pleasing colour. Four wheels are provided for easy movement.\r\nSPECIFICATIONS:\r\n TANK CAPACITY : 15 LITRES\r\n WORKING SPACE : 200 X 200 X 250MM\r\n MAINS : 220/230 VOLTS 50HzAC\r\nTemperature range in (°C)\r\n0 TO 95\r\n-10 TO 100\r\n-20 TO 100\r\n-30 TO 100\r\n-40 TO 100\r\npdf\r\nUV Cabinet\r\n \r\nChrome view cabinet with long and short Wave and white light source and with Electronic chokes. The unit is powder Coat painted.\r\npdf\r\nVacuum Oven\r\nVacuum oven stainless steel interior and mild steel exterior. Door is casted in aluminium and provided with a glass window. Imported digital temperature controller cum indicator is provided. Vaccum control walled with an imported vaccum gauge and two stainless steel are provided. Working Chamber : 27.5 cm dia X 37.5 cm Deep.\r\nTemperature range in (°C)\r\n5 Above Ambient to 100\r\n5 Above Ambient to 150\r\n5 Above Ambient to 200\r\npdf\r\nVacuum Pump(Oil)\r\nThese mechanical pumps are oil sealed, vane type with the following features\r\n Effective vibration free performance.\r\n Simple design and construction\r\n Air ballast facility\r\n Easy oil changing\r\n Easy inspection of oil thro window\r\n Assured ultimate vacuum Easy servicing.\r\nSTAGE\r\nCapacitylit/min\r\n\r\nSingle stage\r\nDouble stage\r\n\r\n50\r\n100\r\n200\r\n50\r\n100\r\n200\r\n\r\nOptional\r\n NON RETURN VALVE\r\n MOISTURE TRAP\r\n THREEWAY CONNECTOR WITH VACUUM GAUGE\r\n EXHAUST FILTER\r\nVACUUM PUMP OIL FREE are also available.VACUUM PUMP OIL FREE are also available.\r\npdf\r\nWater Bath-Rectangular(Single Wall Elctric)\r\nComplete unit including bath and concentric rings are made of stainless steel with arrangement for 6/12 hole\r\nDescription\r\nSize in mm\r\n6Holes of 75mm dia\r\n300 x 250 x 100\r\n12Holes of 75mm dia\r\n400 x 300 x 100\r\npdf\r\nWater Bath-Thermostatic Controlled(Double Walled)\r\nTemperature range from ambient to 100 deg.c. electrically heated model thermostatic control with an accuracy of plus or minus 2 deg.c. double walled inside stainless steel and outside mild steel powder coat painted Top of the bath is provided with a cover made of aluminium powder coat painted works on 220 volts ac Inner water tank is made of 304 ss sheet and argon arc welded and hence leak proof for a minimum period of 5 years unlike other tanks which are of light gauge and lead soldered. After a few operations leak may occur spoiling glass wool and thermostat.Concentric rings are of 304 ss quality .\r\nDescription\r\nSize in mm\r\nRating (kw)\r\n6Holes of 75mm dia\r\n300 x 250 x 100\r\n1\r\n12Holes of 75mm dia\r\n355 x 355 x 405\r\n1.5\r\npdf\r\nWater Bath-Serological\r\nTemperature range from 50 °c above Ambient to 80 °c. thermostatic control With an accuracy of plus or minus 1 °C. Double walled inside stainless steel and Outside mild steel with powder coat finish, Without stirring attachment. Without thermometer and trays.\r\nSize in mm\r\n330 X 300 X 175\r\n455 X 300 X 175\r\n605 X 300 X 175\r\npdf\r\nWater Bath-Digital Temperature Controlled\r\nThis is a regular double walled water bath. The inner tank is made of ss and the outer is Made of mild steel powder coat painted. Stirrer of 1/35 hp motor keeps the temperature Uniform. The temperature is controlled By digital temperature controller cum indicator. An ss tray is provided at the bottom for holding the samples.\r\nSIZE: 400MM L X 300MM B X 100MM H\r\nTEMP.RANGE: 5DEG. C ABOVE AMBINT TO100 DEG. C\r\nACCURACY: ± 1 DEG.C\r\nACCURACY: ± 1 DEG.C\r\n(ANY OTHER SIZE CAN ALSO BE MANUFACTURED UPON REQUEST)\r\npdf\r\nWater Bath Incubator Shaker-(Metabolic Shaking Incubator)\r\nTemperature range from room temperature to 100 °c.digital temperature control with an accuracy of plus minus 0.5 °c. double walled inside made of stainless steel 304 qlty and outside mild steel sheet powder coat painted. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 r.p.m.built in water drain and digital rpm indicator to work on 220/230 volts a.c. shaking tray size : inside (stainless steel 304 qlty)\r\nSHAKING TRAY SIZE : INSIDE (STAINLESS STEEL 304 QLTY)\r\nIsb-1 275 x 275 x 75 mm\r\nIsb-2 275 x 275 x150 mm\r\nIsb-3 405 x 300 x 150 mm\r\n\r\nSHAKING RACKS MADE OF STAINLESS STEEL FOR TYPE ISB 1 & ISB 2\r\nTo hold 16 nos. 25 ml conical flask\r\nTo hold 12 nos. 50 ml conical flask\r\nTo hold 9 nos. 100 ml conical flask\r\nTo hold 5 nos. 250 ml conical flask\r\nTo hold 4 nos. 500 ml conical flask\r\nTo hold 2 nos.1000 ml conical flask\r\nTo hold 25 nos. 25 mm dia test tube\r\npdf\r\nGas Linings & Fume Hoods for AAS/ICP/MS/GC\r\n \r\nWe undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm inlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. We undertake laboratory gas handling and control systems for various inert, high purity, flammable and non flammable gases. To meet the requirements different industry application, we supply and install an extensive range of Gas Purification Panel. Our range includes Gas Purification and Control Panel, Cylinder Regulator Tubing and casing. We provide Gas Purification and Control Panel for 10/kg/cm\r\ninlet pressure & 7 kg/cm outlet pressure. Made using quality tested raw material. Our Cylinder Regulator are of two types one in brass chrome plated body with SS diaphragm and other inSS body with SS diaphragm. The regulator comprises inlet pressure gauge displays the total pressure of cylinder and outlet pressure gauge shows the regulated pressure. We supply Tubing Casing, which is available in 1/2”, 1/4”, 1/8”, 1/16” sizes that comes in copper, S.S. Teflon, nylon material. The size of the tubing casing depends upon the required flow and pressure. Based on cutting edge technology, the casing capping is used to cover the tubing and to maintain the aesthetic look. We offer three different types of casing capping, which are available in M.S. powder coated, aluminum powder coated and PVC material form.\r\npdf\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nQuesst International\r\nIncubator\r\nLab Furnitures\r\nFuemhood\r\nHot Air Oven\r\nBOD Incubator\r\nClean Room\r\nLaminar Air Flow\r\nPowder Dispensing Both\r\nBio Safety Cabinet\r\nDeep Freezer\r\nMuffle Furnance\r\nGas Lining\r\nSpot Extractor\r\nGarment Storage Cabinet\r\nAnti Vibration tables\r\nAluminum Partition\r\nWater Bath\r\nPass Box\r\nVaccuum Oven\r\nHot Plate\r\nAutoclave\r\nAir Curtain\r\nChemical Storage Cabinet\r\nDrawings\r\n<\r\nStability Chamber\r\nAir Shower\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\n HOME\r\n ABOUT US\r\n PRODUCTS\r\n GALLERY\r\n CONTACT US\r\nCATEGORIES\r\n Laboratory Equipments & Instruments\r\n Instruments for Pharma Industry\r\n Analytical Instruments & Consumables\r\n Laboratory Items-General\r\n Laboratory Chemicals\r\n Laboratory Furnitures\r\nContact Form\r\nAddress\r\nHead Office\r\nQuesst International\r\nMr. U. Sivakumar, Mr. Karteek J.N\r\n# 1205,12th CROSS,\r\nNear Essar Petrol Pump, Girinagar 2nd phase ,\r\nBangalore-560 085,\r\nCell no: +91 9980945676, 9845847070\r\nOffice:080-26721955 / +917022031133\r\nE-mail: quesst.international@yahoo.com\r\nWebsite: www.quesstinternational.com\r\nVIZAG Branch\r\nQuesst International\r\nV.Suresh\r\nD No:50/80/7, G2, Anjana Enclave,\r\nOpp: Gurudwar, Seetampet,\r\nVisakhapatnam - 530 016,\r\nMobile: +9184999 78668, 0891-2513568.\r\nE-mail: quesstinternationalvizag@gmail.com\r\nTIN No: 37588941619\r\nWebsite: www.quesstinternational.com\r\nWe are One of the Leading Manufacturers and Suppliers for Laboratory furniture, Biosafety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Lab furniture manufacturer, Laboratory furniture Manufacturers, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore Karnataka India....\r\n2015-2021 © Quesst International. All Copy Rights Reserved\r\nPowered by Secure Media Technologies\r\nQUESST INTERNATIONAL\r\nLaboratory furniture Manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore\r\nLab furniture Manufacturers, Laboratory furniture Manufacturers, Fume hood manufacturers, Bio safety cabinet manufacturers, Air Shower manufacturers, clean room manufacturers Bangalore Karnataka, India\r\n We manufacturers laboratory furniture, fume hood, bio safety cabinet, Air Shower, clean room manufacturers Bangalore Karnataka, India\r\n Lab furniture manufacturers, laboratory furniture Manufacturers, Bio Safety Cabinet Manufacturers, fume hood manufacturers, Air Shower manufacturers, clean room manufacturers, laboratory furniture Manufacturers in Bangalore, fume hood manufacturers in Bangalore, Air Shower manufacturers in Bangalore, clean room manufacturers in Bangalore, Biosafety Cabinet Manufacturers in Bangalore\r\n \r\nLaboratory furniture Manufacturers\r\nAir Shower manufacturers\r\nClean room manufacturers\r\nBio safety cabinet manufacturers\r\nFume hood manufacturers \r\nLab furniture Manufacturers\r\n \r\nhttps://www.quesstinternational.com/\r\nhttps://www.quesstinternational.com/index.html\r\nhttps://www.quesstinternational.com/bio-safety-cabinet-manufacturers-biosafetycabinet-bangalore.html\r\nhttps://www.quesstinternational.com/fume-hood-laboratory-fumehood-manufacturers-bangalore.html\r\nhttps://www.quesstinternational.com/Lab-furniture-laboratory-furniture-fume-hood-clean-room-manufacturers-gallery.html\r\nhttps://www.quesstinternational.com/Clean-Room-Manufacturers-Biosafety-Cabinet-Fume-hood-Biosafety-Cabinet-Manufacturers-contact.html\r\nhttps://www.quesstinternational.com/products.html\r\nhttps://www.quesstinternational.com/pharma-industry.html\r\nhttps://www.quesstinternational.com/analytical-instruments.html#analytical\r\nhttps://www.quesstinternational.com/laboratory-furniture.html\r\nhttps://laboratory-furniture-air-shower.blogspot.com/,